Manual Black Decker GSL700 (page 6 of 100) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

630499

Zoom out

Zoom in

1/100

ENGLISH

(Original instructions)

u Be aware of falling debris when cutting the higher slides of

a hedge.

Additional power tool safety warnings

Warning! Additional safety warnings for shears

u Never allow people unfamiliar with these instructions or

children to use the machine. Local regulations can restrict

the age of the operator.

u Keep in mind that the operator or user is responsible for

accidents or hazards occurring to other people or their

property.

u Never operate the machine while people, especially

children, or pets are nearby.

u Use the machine only in daylight or good artificial light.

u Always ensure that the ventilation openings are kept clear

of debris.

u Use only the manufacturer's recommended replacement

parts and accessories.

u Inspect and maintain the machine regularly. Have the

machine repaired only by an authorized repairer.

Safety of others

u This appliance is not intended for use by persons

(including children) with reduced physical, sensory or

mental capabilities, or lack of experience and knowledge,

unless they have been given supervision or instruction

concerning use of the appliance by a person responsible

for their safety.

u Children should be supervised to ensure that they do not

play with the appliance.

Vibration

The declared vibration emission values stated in the technical

data and the declaration of conformity have been measured in

accordance with a standard test method provided by

EN 60745 and may be used for comparing one tool with

another. The declared vibration emission value may also be

used in a preliminary assessment of exposure.

Warning! The vibration emission value during actual use of

the power tool can differ from the declared value depending

on the ways in which the tool is used. The vibration level may

increase above the level stated.

When assessing vibration exposure to determine safety

measures required by 2002/44/EC to protect persons regularly

using power tools in employment, an estimation of vibration

exposure should consider, the actual conditions of use and the

way the tool is used, including taking account of all parts of

the operating cycle such as the times when the tool is

switched off and when it is running idle in addition to the

trigger time.

Labels on tool

The following pictograms are shown on the tool:

Warning! To reduce the risk of injury, the user must

read the instruction manual.

Wear safety glasses or goggles when operating this

tool.

Do not expose the tool to rain or high humidity.

Beware of sharp blades. Blades continue to move

after the motor is switched off.

Beware of ying objects. Keep bystanders away.

Additional safety instructions for batteries and

chargers

Batteries

u Never attempt to open for any reason.

u Do not expose the battery to water.

u Do not store in locations where the temperature may

exceed 40 °C.

u Charge only at ambient temperatures between 10 °C and

40 °C.

u Charge only using the charger provided with the

appliance/tool. Using the wrong charger could result in an

electric shock or overheating of the battery.

u When disposing of batteries, follow the instructions given

in the section "Protecting the environment".

u Do not damage/deform the battery either by puncture or

impact, as this may create a risk of injury and fire.

u Do not charge damaged batteries.

u Under extreme conditions, battery leakage may occur.

When you notice liquid on the batteries carefully wipe the

liquid off using a cloth. Avoid skin contact.

u In case of skin or eye contact, follow the instructions

below.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker GSL700 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 5,52 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Black Decker GSL700 Manual

Product: