585836
13
Zoom out
Zoom in
Previous page
1/16
Next page
13
ENGLISH
(Original instructions)
Troubleshooting
Problem Possible cause Possible solution
Tool will not start
Lock button not
pressed.
Press the lock button.
Fit the battery
Battery not charged Charge the battery
corectly battery
Chain does not stop
within 2 seconds
when the tool is
switched off
Chain tension is too
slack
Check chain tension
Bar/chain appear hot/
smoking
Oil tank empty Check oil tank level
Oil hole blocked on
chain bar E) and clear the groove
around the edge of the
chainbar.
Chain tension is too
tight
Check chain tension
Guide bar sprocket
nose needs greasing
Oil the guide bar
sprocket nose
Chainsaw does not
cut well
Chain on backwards
Check/modify chain
direction
Sharpen
Chainsaw not using
oil
Debris in tank
Empty oil from tank and
replace
Oil hole in cap blocked
Remove debris from
hole
Debris in chain bar
Remove debris and
clean the chain bar
Debris in oil outlet Remove debris
Chainsaw stops
suddnely during use
Battery depleted
Re-charge battery if
required.
Battery too hot
Leave the battery to
cool for atleast 30
minutes before
proceeding or charging.
Voltage limit protection
Restart the chainsaw.
Let the tool work at its
own pace. Do not
overload .
Maintenance
Regular maintenance ensures a long effective life for the tool.
We recommend you make the following checks on a regular
basis.
Warning! Before performing any maintenance on power tools:
u Switch off and disconnect the tool from the mains supply.
Oil level
The level in the reservoir should not be allowed to fall below
a quarter full.
Saw chain and guide bar
u After every few hours of use and before storage, remove
the guide bar (7) and the saw chain (6) and clean them
thoroughly.
u Make sure that the guard is clean and free from debris.
u Oil sprocket nose and chain bar via the sprocket lubrica-
wear around the guide bar rails.
Saw chain sharpening
If you are to get the best possible performance from the tool it
is important to keep the teeth of the saw chain sharp.
Guidance for this procedure is found on the sharpener pack-
age.
Replacing worn out saw chains
Replacement saw chains are available through retailers or
Black & Decker service agents. Always use genuine spare
parts. (Replacements chain part number A6125CSL-XJ).
Saw chain sharpness
The saw chain cutters will blunt immediately if they touch the
ground or a nail while cutting.
Saw chain tension
Regularly check the saw chain tension.
What to do if your chainsaw needs repair.
Your chainsaw is manufactured in accordance with the rel-
evant safety requirements. Repairs should only be carried out
may result in considerable danger to the user. We recommend
you keep this user manual in a safe place.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker GKC1825L20 T1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker GKC1825L20 T1 in the language / languages: English as an attachment in your email.

The manual is 8,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Black Decker GKC1825L20 T1

Black Decker GKC1825L20 T1 User Manual - Polish - 20 pages

Black Decker GKC1825L20 T1 User Manual - All languages - 136 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info