Manual Black Decker GKC108 TH1 (page 7 of 96) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

585839

Zoom out

Zoom in

1/96

ENGLISH

(Original instructions)

u Once the cut is complete, the clamping arm will rotate fully

back to the stop position.

Sawing (g. E)

u Always hold the tool with both hands.

u Let the blade run freely for a few seconds before starting

the cut.

u Apply only a gentle pressure to the tool while performing

the cut.

u If possible, work with the shoe (6) pressed against the

workpiece. This will improve tool control and reduce tool

vibration, as well as prevent the blade from being dam-

aged.

Hints for optimum use

Cutting branches

Branches up to 75 mm in diameter can be cut with this tool.

Warning! Do not use the tool while in a tree, on a ladder or

on any other unstable surface. Be aware of where the branch

will fall.

u Make sure the tool is running at full speed before making

a cut.

u Hold the tool rmly in place to avoid possible bouncing or

sideways movement of the tool.

u Guide the tool using light pressure.

u Always cut down from the top. This way you will avoid

pinching the saw blade.

u Remove branches starting from branch tip. Reduce the

branch in logical steps cutting off small sections.

u When cutting a limb that is under tension be aware of

spring back. When the tension in the wood bers are

released the spring loaded limb may strike the operator

and /or throw the tool out of control.

u Remove the tool from the cut while it is running at full

speed.

Cutting metal

u Use a ner blade (24 teeth per inch) for ferrous metals

and a coarse blade for non-ferrous materials.

u In thin gauge sheet metals it is best to clamp wood to the

underside of the sheet. This will ensure a clean cut without

excess vibration or tearing of metal.

u Avoid forcing cutting blade as this reduces blade life and

causes costly blade breakage.

Note! Spread a thin lm of oil or other coolant along the line

ahead of the saw cut for easier operation and longer blade

life. Aluminum should be cut dry.

Accessories

The performance of your tool depends on the accessory used.

Black & Decker and Piranha accessories are engineered to

high quality standards and designed to enhance the perform-

ance of your tool. By using these accessories you will get the

very best from your tool.

Blades

The saw will accept a blade up to 15 cm long. Always use the

shortest blade suitable for your project but long enough to

keep the blade cutting through the material. Longer blades are

more likely to be bent or damaged during use. During opera-

tion some longer blades may vibrate or shake if the saw is not

kept in contact with the workpiece.

Maintenance

Your Black & Decker tool has been designed to operate over a

long period of time with a minimum of maintenance. Continu-

ous satisfactory operation depends upon proper tool care and

regular cleaning.

Your charger does not require any maintenance apart from

regular cleaning.

Warning! Before performing any maintenance on the tool,

remove the battery from the tool. Unplug the charger before

cleaning it.

u Regularly clean the ventilation slots in your tool and

charger using a soft brush or dry cloth.

u Regularly clean the motor housing using a damp cloth. Do

not use any abrasive or solvent-based cleaner.

u Regularly open the chuck and tap it to remove any dust

from the interior.

Protecting the environment

Separate collection. This product must not be

disposed of with normal household waste.

Should you nd one day that your Black & Decker product

needs replacement, or if it is of no further use to you, do not

dispose of it with household waste. Make this product avail-

able for separate collection.

Separate collection of used products and packag-

ing allows materials to be recycled and used again.

Re-use of recycled materials helps prevent

environmental pollution and reduces the demand

for raw materials.

Local regulations may provide for separate collection of elec-

trical products from the household, at municipal waste sites or

by the retailer when you purchase a new product.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker GKC108 TH1 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,35 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Black Decker GKC108 TH1

Black Decker GKC108 TH1 Quick start guide - English - 12 pages

Black Decker GKC108 TH1 User Manual - Polish - 12 pages

Black Decker GKC108 TH1 User Manual - Turkish - 12 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Black Decker GKC108 TH1 Manual

Product: