584951
11
Zoom out
Zoom in
Previous page
1/20
Next page
11
ENGLISH
The new connection system does not
release the operator of the tool from the
safety precautions and safe working
practices given in the manual. Particular
attention is drawn to the fact that this
connection system is ‘weather resistant’,
but not suitable for immersion,
submersion or being subjected to water
jets. Take care to prevent the cable from
lying in or trailing through pools of water
or from splashing with hose pipes.
The following items are available:
A6615 20 m cable, socket, 13 Amp plug
A6616 20 m cable, socket, 13 Amp plug and
Cable Tidy frame
A6617 30 m cable, socket, 13 Amp plug and
Cable Tidy frame
A6613 40 m cable, socket, 13 Amp plug and
Cable Tidy reel
Existing cable systems
Your tool either comes with a cable attached
(the cat. no. ends with a C) or with a male connector
built into the tool. If you already own an outdoor
cable system with the old female connector shown
below, we recommend that you replace this
connector with the new female connector, which is
available from most major DIY outlets and from
Black & Decker service centres (cat. no. A6624S).
old female connector new female connector
Follow the instructions supplied with the connector.
If in doubt, consult a qualified electrician.
Existing outdoor tools
To connect existing Black & Decker outdoor tools
to the new system, you will need an adaptor
(see below), which is available as an accessory
from most major DIY outlets and from
Black & Decker service centres (cat. no. A6623S).
This adaptor is only suitable for products
rated up to 500 W. It is not recommended
for use with hover mowers, rotary mowers
with grass collection, chainsaws, shredders
and blower vacs. Please contact your local
service centre if you need further advice.
Fitting your own extension cable
When making your own extension cable, fit a
13 Amp plug to one end of the cable
(see “Mains plug replacement”) and a female
connector to the other end. For wiring
instructions, see those supplied with the
female connector.
A male connector (see below) is already
attached to the power supply cable on your
tool. It is non-rewireable and should not be
removed. If the connector is damaged and
needs replacement, take the tool to a
Black & Decker service centre.
female connector male connector
Never wire an extension cable with
anything other than the female connector
supplied and a 13 Amp BS1363A
approved plug with the recommended
fuse. Never wire a male connector to the
extension cable. Never wire an extension
cable with a plug of any kind at each end
of the cable. This is extremely dangerous
and results in the pins being live, which
may cause a fatal electric shock.
Fitting the female connector
To remove the cover, unscrew the fixing screw
until it is free of the nut which is located in the
hexagonal recess on the underside of the
connector. Take care not to lose the nut if it
falls out.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker GK1640 T4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker GK1640 T4 in the language / languages: English as an attachment in your email.

The manual is 1,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Black Decker GK1640 T4

Black Decker GK1640 T4 User Manual - English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Spanish, Norwegian, Finnish - 128 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info