792731
9
Zoom out
Zoom in
Previous page
1/12
Next page
9
ENGLISH
(Original instructions)
Removing lter (Fig. L)
uLift and remove the lift away dust canister (6) from the
chassis (17) as shown in gure I.
uPlace the dust canister over a trash bin and press the
dust canister lid release button (6a) to empty the dust
canister as shown in gure J.
uGrasp the agitator wheel housing (21) and pull up
to remove.
uRemove the lter (22), from the agitator wheel housing
(21) as shown in gure L.
uShake off or lightly brush any loose dust from the lter.
uInstall the the lter (22), into the agitator wheel
housing (21).
uInstall the agitator wheel housing (21) onto the dust
canister, until it “clicks” rmly into position.
Cleaning the lters
uOnce the lter and pre-lter are removed from the dust
canister shake off or lightly brush any loose dust from
the pre-lter and lter.
uRinse out the dust canister (6) with warm soapy water.
uWash the lters with warm soapy water.
uEnsure the lters are completely dry before retting
(24hrs).
uFollow instructions in the “Removing pre-lter and
Removing lter” sections for assembly instructions.
Note: Maximum dust collection will only be obtained with
clean lters and an empty dust canister.
If dust begins to fall back out of the product after it is
switched off, this indicates that the dust canister is full
and requires emptying or that there is a blockage somewhere.
uWash the lters regularly using warm, soapy water and
ensure that they are completely dry before using again.
The cleaner the lter is, the better the product will perform.
uIt is very important that the lters are completely dry
and correctly in position before use.
Removing and clearing the rotary brushes
(Fig. M)
Warning! To reduce the risk of injury from moving parts,
disconnect battery before cleaning or servicing.
uTo remove the rotary brush (23) from the oor head (8)
depress the release button (24) as shown in gure M.
uLift the rotary brush from its locked position.
uThe rotary brush (23) can now be removed.
uClean the rotary brush, and reinstall. Ensure it is secured
in its locked position before operating.
Storage
The unit can be safely stored using the wall storage bracket
(5a) available through your service department.
as shown in gure N.
Maintenance
Your BLACK+DECKER cordless appliance has been designed
to operate over a long period of time with a minimum of main-
tenance. Continuous satisfactory operation depends upon
proper tool care and regular cleaning.
Warning! Before performing any maintenance on cordless
appliances:
uRemove the battery.
uUnplug the charger before cleaning it. Your charger does
not require any maintenance apart from regular cleaning.
uRegularly clean the ventilation slots in your appliance/
charger using a soft brush or dry cloth.
uRegularly clean the motor housing using a damp cloth. Do
not use any abrasive or solvent-based cleaner.
Replacing the filters
The lters should be replaced every 6 to 9 months and when-
ever worn or damaged. Replacement lters are available from
your BLACK+DECKER dealer.
uRemove the old lters as described above.
uFit the new lters as described above.
Trouble shooting
Problem Possible Cause Possible solution
Unit will not
start.
Battery pack not
charged.
Check battery pack charging
requirements.
Blockage.
Check oorhead tube.
Check extension tube.
Check between extension
tube and bowl
Beater bar stops
working. Obstruction.
The unit is equipped with
a beater bar overload protec-
tion feature. Remove and
clean the beater bar of all
debris and obstructions
Battery pack will
not charge.
Charger not plugged in.
Plug charger into a working
outlet. Refer to Important
Charging Notes for more
details.
Surrounding air
temperature too hot or
too cold
Move charger and battery
pack to a
4 °C or below +40 °C.
Protecting the environment
ZSeparate collection. Products and batteries
marked with this symbol must not be disposed of
with normal household waste.
Products and batteries contain materials that can be recov-
ered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according to
local provisions. Further information is available at
www.2helpU.com
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker BHFEV36B2D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker BHFEV36B2D in the language / languages: English as an attachment in your email.

The manual is 1.59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info