709507
8
Zoom out
Zoom in
Previous page
1/76
Next page
Troubleshooting
Problem Possible Cause Possible Solution
Slow running, noisy or
hot blades.
Dry, corroded blades.
Blades or blade support
bent.
Bent or damaged teeth.
Loose blade bolts.
Lubricate blades.
Straighten blade or
blade support.
Straighten teeth.
Tighten blade bolts.
Unit will not start. Lock off not fully
operated.
Cord not plugged in.
Circuit fuse is blown.
Circuit breaker is
tripped.
Cord or switch is
damaged.
Check that lock off is
fully forward prior to
moving main trigger.
Plug cord into a work-
ing outlet.
Replace circuit fuse.
(If the product repeat-
edly causes the circuit
fuse to blow, discon-
tinue use immediately
and have it serviced
at a BLACK+DECKER
service center or
authorized servicer.)
Reset circuit breaker.
(If the product repeat-
edly causes the circuit
breaker to trip, discon-
tinue use immediately
and have it serviced
at a BLACK+DECKER
service center or
authorized servicer.)
Have cord or
switch replaced at
BLACK+DECKER
Service Center or
Authorized Servicer.
Technical data
BEHTS301
Type 1
BEHTS401
Type 1
BEHTS451
Type 1
Voltage V
AC
230 230 230
Power input W
500 500 550
Blade strokes
(no load)
min
-1
1850 1835 1870
Blade length
cm
50 55 60
Blade gap
mm 22 22 25
Blade brake
time
s
<1 <1 <1
Saw blade Max
cut
mm
35 35 35
Weight
kg 2.47 2.54 2.65
BEHTS501
Type 1
Voltage V
AC
230
Power input W
600
Blade strokes
(no load)
min
-1
1840
Blade length
cm
60
Blade gap
mm 25
Blade brake
time
s
<1
Saw blade Max
cut
mm
35
Weight
kg 2.65
Level of sound pressure according to EN 60745:
Sound pressure level at operator position (L
pA
) 89 dB(A), uncertainty (K) 3.5 dB(A)
Sound power level (L
WA
) 98 dB(A), uncertainty (K) 2.0 dB(A)
Vibration total values (triax vector sum) according to EN 60745:
Vibration emission value (a
h, D
) 4.1 m/s
2
, uncertainty (K) 2.1 m/s
2
EC declaration of conformity
MACHINERY DIRECTIVE
OUTDOOR NOISE DIRECTIVE
BEHTS301, BEHTS401, BEHTS451, BEHTS501 – Hedge
Trimmer
Black & Decker declares that these products described under
"technical data" are in compliance with:
2006/42/EC, EN 60745-1:2009 +A11:2010,
EN 60745-2-15:2009 +A1:2010
2000/14/EC, Hedge trimmer, Annex V
Measured sound power level (L
wA
) 98 dB(A)
Uncertainty (K) 2,0 dB(A)
Guaranteed sound power (L
wA
) 100 dB(A)
These products also comply with Directive
2014/30/EU and 2011/65/EU.
For more information, please contact Black & Decker at the
following address or refer to the back of the manual.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker BEHTS401 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker BEHTS401 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 5,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info