Manual Black Decker BEHTS401 (page 6 of 76) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

709507

Zoom out

Zoom in

1/76

ENGLISH

(Original instructions)

Wear safety glasses or goggles when operating

this tool.

Wear ear protection when operating this tool.

Immediately disconnect the cable from the mains

if it is damaged or cut.

Do not expose the tool to rain or high humidity.

100

Directive 2000/14/EC guaranteed sound power.

Electrical safety

This tool is double insulated; therefore no earth

wire is required. Always check that the power

supply corresponds to the voltage on the rating

plate.

u If the supply cord is damaged, it must be replaced by the

manufacturer or an authorised BLACK+DECKER Service

Centre in order to avoid a hazard.

u When using the tool outdoors, only use extension

cables intended for outdoor use. A suitable rated

BLACK+DECKER extension cable of up to 30 m can be

used without loss of power.

u Electric safety can be further improved by using a high-

sensitivity 30 mA residual current device (RCD).

Features

This tool includes some or all of the following features.

1. Blade

2. Guard

3. Auxiliary handle

4. Lock off button

5. Trigger switch

6. Switch handle

7. Cord retainer

8. Sawblade

9. Sawblade shoe

Assembly

Warning! Before assembly, make sure that the tool is

switched off and unplugged and that the blade sheath is tted

over the blades.

Attaching guard to trimmer (g. A, B)

The trimmer is shipped with the guard unattached to the trim-

mer. To attach the guard:

u Remove guard retaining screw 10 with a Phillips

screwdriver (not supplied).

u Position the guard in place as shown in Fig. A. Ensuring

the guard slots into the grooves on the unit.

u Insert the guard retaining screw 10 into the opening on the

side of the guard and tighten securely as shown in Fig. B.

Warning! Only use with handle and guard properly assembled

to hedge trimmer. The use of the hedge trimmer without

the proper guard or handle provided may result in serious

personal injury.

Attaching extension cord to trimmer (g. C)

A cord retainer (7) is incorporated into the rear of the switch

handle (6).

u Near the end of the extension cord, fold the extension

cord to create a loop.

u Feed the loop into the cord retainer housing 11 as shown

in Fig. C.

u Hook the loop onto the cord retainer 7 so it rests in the

cord retainer.

u Plug the extensvion cord into the unit.

Correct hand position (Fig. D)

Always hold the trimmer, as shown in the illustrations in this

manual, with one hand on the switch handle and one hand on

the auxiliary handle (Fig. D). Never hold the unit by the blade

guard.

Use

Warning! Let the tool work at its own pace. Do not overload.

Switching on and off

Note: For your safety, this tool is equipped with a double

switching system. This system prevents starting the tool

inadvertently and will only allow operation while holding the

tool with both hands.

Switching on (g. E)

u To turn the tool “ON”, press the lock off button (4) in the

auxiliary handle (3) backward and squeeze the trigger

switch (5) . Once the unit is running, you may release the

lock off button. In order to keep the unit running you must

continue to squeeze the trigger. To turn the tool “OFF”,

release the trigger.

Warning! Never attempt to lock a switch in the ON position.

u Regularly oil the blades.

Guidelines for trimming

Extension cord (g. F)

u Always keep extension cord behind trimmer and away

from the trimming operation as shown in gure F. Never

drape it over a hedge being trimmed.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker BEHTS401 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 5,09 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Black Decker BEHTS401 Manual

Product: