Manual Black Decker BD 1000i (page 10 of 109) (English, German, Dutch, Danish, French, Italian, Polish, Swedish, Finnish, Norwegian, Finnish)

661587

Zoom out

Zoom in

1/109

b) connect between the DC output socket and

the battery terminals using a charging leads.

The leads shall be connected making sure of

the (+) and (-)polarity.

c) reset button: Be used to the DC output

outlet to ON or OFF. Push down button, DC

output to ON, Be provided the DC socket with

the over-current protection function.

d)12VDC 5A is rated condition ,it will reach

18VDC at no-load condition,even more.

7.4 Switching off the engine

• Before you switch off the generator, allow

it to run briey with no electrical equipment

connected so that it can cool down.

• Move the ON/OFF switch (Item 7) to the "O"

Off position.

• Close the stop cock (Item 3).

8. Cleaning, maintenance, storage,

transport and ordering of spare parts

witch off the motor and pull the spark

plug boot from the spark plug before doing

any cleaning and maintenance work on the

equipment.

Important: Switch off the generator

immediately and contact your service station:

• In the event of unusual vibrations or noise.

• If the engine appears to be overloaded or

misres.

8.1 Cleaning

• Keep all safety generators, air vents and

the motor housing free of dirt and dust as far

as possible. Wipe the generator with a clean

cloth or blow it with compressed air at low

pressure.

• We recommend that you clean the generator

immediately each time you have nished

using it.

• Clean the generator regularly with a moist

cloth and some soft soap. Do not use cleaning

agents or solvents; these could attack the

plastic parts of the equipment. Ensure that no

water can seep into the generator.

8.2 Air lter (Fig 6-7)

Clean the air lter at regular intervals, and

replace it if necessary. Please also read the

service information.

• Remove the air lter cover (Item E).

• Remove the air lter (Item G).

• Clean the air lter by tapping it. In cases

of stubborn dirt rst clean with soapy water,

then rinse with clear water and air-dry before

reinserting. Important: Do not use abrasive

cleaners or petrol to clean the air lter.

• Assemble in reverse order.

8.3 Spark plug (Fig. 8-9)

Check the spark plug for wear at regular

intervals. Please also read the service

information.

• Pull off the spark plug boot (Item I) by

twisting it.

• Remove the spark plug (Item J) using the

supplied spark plug wrench.

• Clean the spark plug with a copper wire

brush or t a new one.

• Assemble in reverse order.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker BD 1000i in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Finnish, Norwegian, Finnish as an attachment in your email.

The manual is 1,35 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Black Decker BD 1000i Manual

Product: