661587
9
Zoom out
Zoom in
Previous page
1/109
Next page
9
• Move the ON/OFF switch (Item 7) to the "I"
position.
• Pull the choke lever (Item 6).
• Start the engine with the starter cord (Item
4) by pulling the handle forcefully. If the
engine does not start, pull the handle again.
Important:
Always pull the starter cable slowly until you
feel the initial resistance before you then pull
it quickly to start the engine. Do not allow the
starter cable to whip back of its own accord.
• Push the choke lever (Item 6) back
approximately 5 to 10 seconds after the
engine has started.
7.2 Connecting consumers to the generator
• Connect the 230 V~ electrical appliances to
be powered to the socket (Item 4). Important:
This socket is allowed to be exposed to a
continuous (S1) load of 850 W and temporarily
(S2) for a maximum of 300 second to a load of
900 W.
7.3 Overload cut-out
230 V socket
• Reduce the level of power to be drawn.
Important: If an overload occurs, ensure
that the power drawn does not exceed the
generator's maximum power output and
that no defective electrical appliances are
connected.
7.3.1 DC Application(option)
a) Use the supplied DC connecting cable
to make connection to 12VDC powered
appliance. The DC output of the generator is
not treated by a precise electric circuit. Never
use it to power any precise DC instrument.
and ensure thorough mix.
Important: Do not use a different mixing
ration and do not use pure petrol, failure to
use the correct petrol/oil mixture will cause
the engine to seize.
Do not use fuel if it is more than 2-3 months
old.
If you do not intend to use the machine for a
lengthy period, empty the tank and rell it
before you start work again.
Ensure that you do not overll the tank
and spill petrol. (If you do spill, wipe up the
excess amount and wait until the vapors have
evaporated – danger of ignition.) Screw the
tank cover back on.
6.5 Handle assambling
Assamble the handle (1) as shown in g. 5
7. Operation
• Check the fuel level and top it up if
necessary.
• Make sure that the generator has sufcient
ventilation.
• Make sure that the ignition cable is secured
to the spark plug.
• Inspect the immediate vicinity of the
generator.
• Disconnect any electrical equipment which
may already be connected to the generator.
7.1 Starting the engine (Fig 2)
Important: Do not use any chemical starting
agents such as highly volatile fuels or similar.
• Open the stop cock (Item 3) by turning it
down.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker BD 1000i at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker BD 1000i in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Finnish, Norwegian, Finnish as an attachment in your email.

The manual is 1,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info