669285

Bissell Big Green 86T3 SERIES Manual

11
Zoom out
Zoom in
Previous page
1/16
Next page
Mainnce & Care
Brush removal and replacement
1. Turn OFF (0) the machine and unplug from
the outlet.
2. Remove the dirty and clean water tanks from
the base of the machine.
3. While standing behind the unit, lay the unit
on its’ side (cord side down).
4. Looking at the bottom of the unit, find the
center of the brush carriage where the carriage
latch is located. It is between the brush
assembly and wheels.
5. Pull the brush carriage towards you with
one hand until it stops. Pinch the carriage latch
with the other hand while pulling the carriage
towards you. The carriage should swing out to
access brush end cover.
6. Remove three screws from endcap. Pull
endcap off to release brush roll.
7. With cover removed, the brush comes
out easily by tilting the loose end out of the
carriage.
8. To replace the brush roll back into the unit,
place the large open end of the brush onto the
carriage and tilt opposite end back into place.
9. With the brush sitting relatively straight up
and down by itself, place endcap back on top
and replace three screws. The brush will need
to be held and centered to the cover while
placing it back on.
10. Spin the brush by hand to make sure it
turns freely with some minor resistance from
the motor. Push brush carriage back into place
with a light pull against the lock.
4.
5.
6A.
7.
9. 10.
6B.
8.
3.
WARNING
To reduce the risk of electric shock, turn power switch
o and disconnect plug from electrical outlet before
performing maintenance or troubleshooting checks.
www.BISSELL.com
800.237.7691
11
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bissell Big Green 86T3 SERIES at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bissell Big Green 86T3 SERIES in the language / languages: English as an attachment in your email.

The manual is 3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info