669285
10
Zoom out
Zoom in
Previous page
1/16
Next page
Belt removal and replacement
1. Turn off the machine and unplug it from the
outlet.
2. Remove the dirty and clean water tanks from
the base of the machine.
3. While standing behind the unit, lay the unit
on its’ side (cord side up)
4. Looking at the bottom of unit, find the back
center of the brush carriage where the carriage
latch is located. It is between the brush assem-
bly and the front wheels.
5. Pull brush carriage towards you with
one hand until it stops, then pinch the carriage
latch with other hand while pulling the carriage
towards you. The carriage should swing out to
access belt cover.
6. Remove three screws from cover. Lift and
remove to access brush carriage.
7. Turn the belt inward towards the large pulley
while lifting out.
8. Place new belt over small pulley first and
then slip the belt over the large pulley.
NOTE: Test the brush roll to make sure it spins
freely before moving to the next step.
9. Replace the brush carriage and screws.
10. Push brush carriage back into place
making sure the carriage latch locks back into
place.
Mainnce & Care
WARNING
To reduce the risk of electric shock, turn power switch
o and disconnect plug from electrical outlet before
performing maintenance or troubleshooting checks.
4.
6B.
6A.
8.
10.
3.
5.
7.
9.
www.BISSELL.com
800.237.7691
10
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bissell Big Green 86T3 SERIES at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bissell Big Green 86T3 SERIES in the language / languages: English as an attachment in your email.

The manual is 3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info