669286

Bissell Big Green 48F3 SERIES Manual

15
Zoom out
Zoom in
Previous page
1/20
Next page
www.bissell.com
15
Maintenance and care
Brush removal and replacement
1. Turn OFF (0) the machine and unplug
from the outlet.
2. Remove the dirty and clean water/solu-
tion tanks from the base of the machine.
3. While standing behind the unit, lay the
unit on its’ side (cord side down).
4. Looking at the bottom of the unit, find the
center of the brush carriage where the
carriage latch is located. It is between
the brush assembly and wheels.
5. Pull the brush carriage towards you with
one hand until it stops. Pinch the car-
riage latch with the other hand while
pulling the carriage towards you. The
carriage should swing out to access
brush end cover.
6A. Remove three screws from endcap.
6B. Pull endcap off to release brush roll.
7. With cover removed, the brush comes
out easily by tilting the loose end out of
the carriage.
8. To replace the brush roll back into the
unit, place the large open end of the
brush onto the carriage and tilt opposite
end back into place.
9. With the brush sitting relatively straight
up and down by itself, place endcap
back on top and replace three screws.
The brush will need to be held and cen-
tered to the cover while placing it back
on.
10. Spin the brush by hand to make sure it
turns freely with some minor resistance
from the motor. Push brush carriage back
into place with a light pull against the
lock.
4.
3.
5.
6A.
7.
9. 10.
6B.
8.
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bissell Big Green 48F3 SERIES at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bissell Big Green 48F3 SERIES in the language / languages: English as an attachment in your email.

The manual is 4,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info