669286
14
Zoom out
Zoom in
Previous page
1/20
Next page
www.bissell.com
Maintenance and care
14
Belt removal and replacement
1. Turn off the machine and unplug it from
the outlet.
2. Remove the dirty and clean water/solu-
tion tanks from the base of the machine.
3. While standing behind the unit, lay the
unit on its’ side (cord side up)
4. Looking at the bottom of unit, find
the back center of the brush carriage
where the carriage latch is located. It
is between the brush assembly and the
front wheels.
5. Pull brush carriage towards you with
one hand until it stops, then pinch the
carriage latch with other hand while
pulling the carriage towards you. The
carriage should swing out to access belt
cover.
6. Remove three screws from cover. Lift and
remove to access brush carriage.
7. Turn the belt inward towards the large
pulley while lifting out.
8. Place new belt over small pulley first and
then slip the belt over the large pulley.
9. Replace the brush carriage and screws.
10. Push brush carriage back into place
making sure the carriage latch locks
back into place.
4.
6B.
6A.
8.
10.
3.
5.
7.
9.
WARNING:
To reduce the risk of fire, electric
shock, or injury,turn power
OFF and disconnect plug from
electrical outlet before performing
maintenance or troubleshooting.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bissell Big Green 48F3 SERIES at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bissell Big Green 48F3 SERIES in the language / languages: English as an attachment in your email.

The manual is 4,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info