560228
4
Zoom out
Zoom in
Previous page
1/8
Next page
4
w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
Getting ready
1. Attach mop pad.
A. Set swivel mop head in mop pad, mak-
ing sure toggle is located on the back.
B. Tighten mop pad by pulling on elastic
cord while pressing on toggle.
2. Fill the water tank
A. Remove tank by lifting straight up and
away from unit.
B. Unscrew cap at bottom of water tank and
remove the insert assembly. Fill water tank
with water. Replace insert assembly and cap,
tighten until snug. Replace water tank on unit.
Thoroughly sweep or vacuum floor prior to cleaning with the Steam Mop.
1. With the screw holes at the top, hold the Storage Hook in the location on the wall you want
it to hang. Be sure a stud has been located so it can hang securely. With a pencil, mark the
position of both screw holes
2. Drill 1/8” diameter holes in the center of the pencil marks.
3. Place storage hook over drilled holes and secure by screwing in place with the provided screws.
Wall Storage Hook (select models only)
Your BISSELL Steam Mop may have come with
a storage hook. The storage hook provides a
convenient way to store your Steam Mop. You
may choose to hang it in a closet, utility room, or
any location that works for you.
Operation
Handle Assembly
Lower Body
Swivel Mop Head
1
2
3
4
1A 1B
Your Steam Mop assembles quickly and easily.
The only thing you will need for assembly is a
Phillips head screwdriver.
Your
Steam Mop comes in three easy to assemble
components
Handle Assembly
Lower Body
Swivel Mop Head
1. Attach lower body to swivel mop head
and secure with small Phillips head screw.
Tighten until secure.
2. Slide handle assembly down into lower body
until it will go no further.
3. Secure the handle with large Phillips head
screw through the screw. Tighten until secure.
4. Slide water tank onto lower body by lining up
vertical glides and gently sliding tank into place.
Assembly
2A 2B
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bissell 1867 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bissell 1867 in the language / languages: English as an attachment in your email.

The manual is 0,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info