496741

Binatone iDECT C10i Manual

33
Zoom out
Zoom in
Previous page
1/47
Next page
31
 
You may need the R button to send a Recall signal (also called Flash or
Timed Break Recall) for network services or if you are connected to a .
You should normally leave the Recall Time at its default setting of Short
(100ms), as this is the standard recall required in the UK telephone network,
but it can be changed to Medium (250ms) or Long (600ms) if your telephone
is connected to a  that requires a different recall time.
1. Press <MENU/OK>.
2. Press <UP/DOWN> to select  and then press <MENU/OK>.
3. Press <UP/DOWN> to select  and then press <MENU/OK>.
4. Press <UP/DOWN> to select  or  and then
press <MENU/OK> to conrm the setting.

When this function is set to Off, the rst ring from an incoming call will not
sound. This is useful on exchanges where calling line identity is sent after
the rst ring.
1. Press <MENU/OK>.
2. Press <UP/DOWN> to select  and then press <MENU/OK>.
3. Press <UP/DOWN> to select  and then press <MENU/OK>.
4. Press <UP/DOWN> to select  or  and then press <MENU/OK>
to conrm the setting.

You should normally leave the dialling mode at its default setting of TONE
(also called DTMF) unless the phone is connected to an old exchange that
only recognises PULSE dialling.
If PULSE dialling is set, during a call you can press < * > to switch to
TONE dialling for the rest of that call.
1. Press <MENU/OK>.
2. Press <UP/DOWN> to select  and then press <MENU/OK>.
3. Press <UP/DOWN> to select  and then press <MENU/OK>.
4. Press <UP/DOWN> to select  or  and then press
<MENU/OK> to conrm the setting.
… 33 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Binatone iDECT C10i at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Binatone iDECT C10i in the language / languages: English as an attachment in your email.

The manual is 1,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info