496741
31
Zoom out
Zoom in
Previous page
1/47
Next page
29
 
When global  is activated, all system handsets and the telephone base
will be silent when there is an incoming call. Press and hold the <
> button
on the telephone base for 5 seconds to turn this feature on. The handsets
will show  on their display, and a small light will turn
on just below the < > button on the base. Press the < > button on the
telephone base to turn this feature off.
 
You can program an individual handset to be silent during predetermined
time frames. This setting is independent to each handset and only silences
the ringer of the handset programmed.
To program the  time for an individual handset
1. Press <MENU/OK>.
2. Press <UP/DOWN> to select  and then press <MENU/OK>.
3. Press <UP/DOWN> to select from:
 The handset enters the DND mode once during the set
time.
 The handset enters the DND mode daily during the set time.
Turn DND off.
4. Press <MENU/OK> to select the option.
5. If  or  is selected, enter the desired start time, in the
format set, using the digit keys and <UP/DOWN> to change between
AM or PM if required. and then press <MENU/OK>.
6. Enter the desired stop time, as above, and then press <MENU/OK> to
conrm the setting.
 There is no indication that a DND time has been set, until the
handset enters the DND period, when  is shown on its
display.
 When global DND is turned on, an individual handset will continue to
be in DND mode even after the set  time on the handset ends.
 
The call barring feature can be set on any handset to prevent it from dialling
any phone number beginning with certain digits that have been set. Three
different barring numbers, each of up to 4 digits, can be set. If a restricted
number is dialled, the call will not be connected, an error tone is emitted
and the handset returns to the stand-by state. The system  is required
to set or modify the call barring state, and should be changed from 0000 to
prevent the call bar setting being easily overcome.
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Binatone iDECT C10i at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Binatone iDECT C10i in the language / languages: English as an attachment in your email.

The manual is 1,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info