- 4 -
KH2232
ƽ Important information for your
safety
Setup
• Check the bread maker for transport
damage after unpacking. If necessary,
contact your supplier.
• Place the appliance on a dry, flat
and heat-resistant surface.
• Do not place the appliance near gas
burners, electric ovens or other heat
sources.
• Do not place the appliance near any
inflammable materials, explosive
and/or self-igniting gases.
• Make certain that the ventilation
slits of the appliance are not
covered.
• Before plugging in the appliance,
check whether the electricity type
and mains voltage match the infor-
mation on the type plate.
• Do not draw the power cord over
sharp edges or close to hot surfaces
or objects. This may damage the
insulation of the power cord.
• To prevent anyone from tripping
over, the appliance is provided with
a short power cord.
• If you plan to use an extension
cable, make sure that the maximum
permissible power rating of the
cable corresponds with that of the
bread maker.
• Place the extension cable in such a
way as to prevent anyone from trip-
ping over it or pulling it accidentally.
During operation
• Check the condition of the power
cord and plug frequently. If the
power cord of this appliance is
damaged, it must be replaced by the
manufacturer, the manufacturer's
customer service or a similarly quali-
fied person to avoid associated
dangers.
• Children using electrical appliances
or standing close to them may be
allowed only under the supervision
of an adult.
• This appliance complies with the
normal safety regulations. Inspec-
tion, repair and technical mainte-
nance may only be performed by
a qualified specialist.
• Do not place any objects on the
appliance and do not cover it during
operation. Fire Hazard!
• Caution, the bread maker becomes
hot. Only touch the handles and
touch buttons of the appliance. If
necessary, use a kitchen cloth.
• Before taking out the accessories or
inserting them, allow the appliance
to cool down and unplug the power
cord.
• Do not re-locate the bread baking
machine if the baking mould con-
tains hot ingredients or liquids.
• Avoid contact with the rotating
kneading paddles during operation.
Injury hazard!
• Stop the appliance off by means
of the On/Off button, then pull the
power plug out of the wall socket to
disconnect the appliance from the
power supply.
