814514
14
Zoom out
Zoom in
Previous page
1/27
Next page
EN
14
Operation of the puro S
Connect your puro S to a power socket with the correct electric specications. You can nd them on the rating plate on the
back of the device and in the chapter “Technical Data” on page 32. Make sure that the power plug is properly inserted into
the power socket.
Energy saving mode1
For use of your puro S it is necessary that the mixing container is placed correctly on the motor block and the power cable
connected to a suitable power supply. Without the attached mixing container your puro S cannot be switched on for safety
reasons. The On/Off button ashes red.
Switching on / activation of the standby mode2
Place the mixing container on the motor block and press the jog-dial. Now the available options for each function mode light
up on the control element. The function mode depends on the attached container. With the mixing container premium the
function mode 1 is active. With the mixing container sport the function mode 2 is active.
Function mode 1
In this mode the 8 automatic programmes, all speed settings (settings 1-10) in manual mode as well as the pulse mode are
available. In standby mode the display now shows 00:00minutes, the speed setting is„1“. In the control panel all symbols
light up in white. The standby symbol above lights up in red.
Function mode 2
In this function mode the speed settings (settings 1 and 2) and the pulse mode are available. The motor switches off automatically
after 1 minute. In standby mode the standby symbol lights up in red. The On/Off switch and the two speed settings light up
in white.
iPMS (integrated Power Management System) (automatic power in the speed settings 1-5):
During the mixing of solid foods (eg. dough, nut mousse) the automatic power checks continuously the motor power and
automatically readjusts it when necessary. That way the optimal processing of the mixing content is ensured. This function is
activated in both of the above function modes.
Due to this automatic power a dynamic perception of speed can occur during the preparation of softer foods in the speed
settings 1-5. This does is not a defect, but caused by the automatic power.
Your puro S automatically changes from standby mode to energy saving mode after 3 Minutes of inactivity.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bianco di puro Puro S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bianco di puro Puro S in the language / languages: English as an attachment in your email.

The manual is 0.37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bianco di puro Puro S

Bianco di puro Puro S User Manual - German - 27 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info