528780
8
Zoom out
Zoom in
Previous page
1/31
Next page
8
Press MODE/ENTER to go back to
the function display.
A. SCAN FUNCTION
This function uses the large screen to
provide a sequential display of all the
values shown in the small windows, to
cancel this function press the
MODE/ENTER key and the large
screen will freeze the value being
displayed at the time when the
MODE/ENTER key was pressed.
B. TIME FUNCTION
This function counts up or down in
steps of one second, up to a
maximum of 99:00 seconds.
Pressing the RESET key for more
than two seconds will reset all of the
values.
1. Pressing the MODE/ENTER key will
select the TIME window, the value to
be programmed will start flashing.
2. Pressing the UP/DOWN ▲▼ key
will display the programmed exercise
time.
3. Begin the exercise and when the
time that you programmed has
elapsed the monitor will emit a beep
for 10 seconds, after which the time
will begin to increase automatically.
C. DISTANCE FUNCTION
This function counts up or down in
steps of 0.5 km, up to a maximum of
99.5 km.
Pressing the RESET key for more
than two seconds will reset all of the
values.
1. Pressing the MODE/ENTER key will
select the DISTANCE window, the
value to be programmed will start
flashing.
2. Pressing UP/DOWN ▲▼ will
display the programmed exercise
distance.
3. Begin the exercise. When the
programmed distance has finished,
the monitor will beep for 10 seconds
and then begin to increase the
distance automatically.
D. CALORIE FUNCTION
This function counts up or down in
steps of 10 calories, up to a maximum
of 9999 kcal.
Pressing the RESET key for more
than two seconds will reset all of the
values.
1. Pressing the MODE/ENTER key will
select the CALORIES window, the
value to be programmed will start
flashing.
2. Pressing UP/DOWN ▲▼ will
display the programmed exercise
calories.
3. Begin the exercise. When the
programmed calories have finished,
the monitor will beep for 10 seconds
and begin to increase the calories
automatically.
E. PULSE FUNCTION
The pulse function allows you to
monitor your heart rate during
exercise, values range from between
30-240 BPM (beats per minute).
Pressing the RESET key for more
than two seconds will reset all of the
values.
Pressing the MODE/ENTER key will
select the PULSE window, the value
to be programmed will start flashing.
Pressing MODE/ENTER will display
the AGE value that you have
programmed for the exercise,
whenever you exceed the
programmed value the heart symbol
and the pulse rate will flash on and off
alternately. This indicates that you
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BH Fitness H491 Monitor at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BH Fitness H491 Monitor in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info