528708
8
Zoom out
Zoom in
Previous page
1/41
Next page
8
English
ATTACHING THE MONITOR.-
Take the monitor (24), remove the four
screws (25) from the base, Fig.1,
connect the terminal (32), coming out
of the monitor (24) with the terminal
for the cable (26) coming out of the
handlebar stem (8), next plug terminal
(30) which is also sticking up from the
handlebar stem into terminal (9),
position the monitor on the handlebar
stem, making sure not to catch any of
the cables, and attach it using the four
screws (25) removed previously.
Important: Deposit electronic
components in special containers,
Fig.2.
ELECTRONIC MONITOR
To give you greater control over your
exercise, this electronic unit provides
simultaneous read-outs of speed /
RPM, calories burnt, watts, distance,
exercise time, and pulse.
If at any time during exercise you
press the START/STOP button then
all of the unit’s functions will stop.
Pressing the START/STOP button
again will restart the machine.
The monitor will switch itself off
automatically if the unit stands idle for
more than 60 seconds.
MONITOR FUNCTIONS
This monitor has five keys: ENTER,
UP, DOWN, START/ STOP, MODE.
The program level you have selected
is shown simultaneously in the right
section of the display. On the left is
the Time, r.p.m./Speed, Distance,
Calories, Watts and Pulse.
The central part of the display shows
the braking position applied whilst
exercising, using two stages:
Lower stage: Braking force
from level 1 to level 8.
During this stage of levels, braking
force can be adjusted by pressing the
UP/DOWN key, up to the level 8.
Each stage change will be
accompanied by an acoustic signal.
Upper stage: Braking force from
level 9 to level 16.
With the monitor displaying , you
can give the order to apply braking
force at higher levels by pressing the
UP/DOWN key, the chosen level will
then flash.
After 30 seconds in mode, the
braking position will return to the
previously assigned value.
Each stage change will be
accompanied by an acoustic signal.
This monitor also has 1 manual
program, 6 competition programs; 4
TEST programs.
With the monitor working you can
alternate between the (RPM / calories
/ watt) and (DIST / time / pulse) by
pressing the MODE key.
You can reset of all the values back to
zero by holding the START/STOP key
down for 3 seconds and will display
the main menu screen.
MANUAL FUNCTION.-
There is no limit on time or distance. On
the main menu press the START/STOP
key and the monitor will switch on within
3 seconds, shown by a countdown on
the time display, start exercising and
use the UP/DOWN keys to increase or
decrease the exertion level.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BH Fitness H107 Monitor at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BH Fitness H107 Monitor in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info