542477

BH Fitness H-491 Manual

9
Zoom out
Zoom in
Previous page
1/33
Next page
9
English
GENERAL INSTRUCTIONS.-
Carefully read through the instructions
in this manual.
Make sure that the machine operates
correctly before attempting to use it.
Do not switch it on if any faults are
detected. Parents and/or those
responsible for children must always
be aware of their curious nature and
how this can often lead to hazardous
situations and behaviour which could
cause accidents For this reason they
must always be supervised by a
responsible person. This appliance
must never be used as a toy.
This appliance can only be used by
one person at a time.
ASSEMBLY INSTRUCTIONS.-
The assistance of a second person
is advisable for the assembly work.
1 Take the unit out of its box and
make sure that all of the pieces are
there, Fig.1:
(A) Main body; (6) handlebar stem;
(16) Saddle post; (11) Stabiliser bar
with wheels; (15) Stabiliser bar with
adjustable blocks; (19) Saddle; (12 R)
and (12 L) Pedals; (1) Monitor; (2)
Handlebar; Bag of screws containing:
(10) Bolts M-8 x 70; (14) Flat washers;
(13) Cap nuts M-8; (a) and (b)
Spanners; (c) Transformer (Mod.H-
493).
2 Take the stabiliser bar (15) with
adjustable blocas (Y) and position it
on the stand at the rear of the
machine, as shown in Fig.2, and insert
bolts (10), fit the flat washers (14) and
the nuts (13), tighten securely.
Take the stabiliser bar with wheels
(11) and position it so that the two red
dots (X) line up, as shown in Fig.2A,
insert bolts (10), fit the flat washers
(14) and the nuts (13), tighten
securely.
3 Mod. H491. Take the screws (8) out
of the main body (A), bring the main
post (6) up to the boss on the main
body, Fig.3, and connect terminals (p)
and (p1). Insert the tip of the cable
sheath into the cable tension control
support (J1), as shown in Fig.4, pull
the sheath (J) up slightly and insert it
into the slot, see Fig.4A, then fit the
main mast onto the boss on the main
body, Fig.5, taking care not to pinch
the cables and make sure that the
tensioning control (W) operates
correctly. Put bolts (8), along with their
washers (7) back in, Fig.6, making
sure that the handlebar is straight and
then tighten securely.
Mod. H-493. Take the screws (8) out
of the main body (A), bring the main
post (6) up to the boss on the main
body, Fig.4B, and connect terminals
(p) and (p1). Put bolts (8), along with
their washers (7) back in, Fig.6,
making sure that the handlebar is
straight and then tighten securely.
4 ATTACHING THE PEDALS.-
The assembly instructions for the
pedals must be followed to the
letter, fitting these incorrectly could
damage the screw thread on the
pedal or the crank.
Right and left refer to the position
that the user adopts when sitting
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BH Fitness H-491 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BH Fitness H-491 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info