528801

BH Fitness G690 Manual

13
Zoom out
Zoom in
Previous page
1/55
Next page
SK LINE G-690 / G-690TV
sportkoncept
13
12-Do not overexert yourself or exercise beyond
your capabilities. Stop exercising immediately if you
are in pain or feel strange, and
seek professional
medical advice
.
13-To prevent the risk of electric shock keep
liquids away from all electrical components (motor,
switches, etc.). Do not rest anything on the casing,
the treadmill belt or the electronic monitor. Place
liquids on the storage rack inside the appropriate
container.
14-Do not use the equipment if it is damaged,
does not work correctly or if it has been dropped
from a height or fallen in water. Take the
equipment to a technical service centre to have it
checked and repaired.
15-Make sure that the mains supply voltage is
suitable for the machine before plugging it in. The
mains voltage output must be 220 V-240V and the
electric socket must have the same pin layout as
the plug. If this is not the case, please consult your
technical service centre.
16-The equipment must only be connected to
electrical circuits with an earth connection. If
not, the user risks receiving an electric shock.
Make sure that the electric mains socket has the
same pin layout as the plug on the appliance Fig A.
17-Do not use the machine if the mains cable
becomes damaged or worn.
18-Do not tug on the mains cable in order to
unplug the unit.
19-Keep the plug and mains cable away from hot
surfaces.
20-Do not use the equipment in areas where
aerosol sprays are used.
21-Do not use the machine outdoors.
22-Do not attempt any maintenance and/or repair
work other than that stated in this manual. For
more complicated tasks, please get in touch with
your technical assistance service.
SAFETY BREAKER
This model is equipped with an electronic circuit
breaker to protect both the electronic and electrical
circuits.
This safety device will be automatically triggered if
the unit is subjected to abnormal force or heat.
Should this occur:
1.- Set switch (L), located on the casing, to the “0”
(OFF) position Fig B.
2.- Press the circuit button (C) to reset the unit.
3.- Next, set switch (L) to the “I” (ON) position and
the unit will be ready for use again.
Should the circuit breaker trip repeatedly then the
most probable causes are:
- Abnormal working conditions,
- Treadmill belt in need of lubricant,
- Solvent based lubricants used (use BH type),
- Belt is too tight.
Plug the unit into a wall socket with an EARTH
terminal. Set switch (L) to Position [1].
Fig B
ASSEMBLY INSTRUCTIONS
Take the unit out of the box and place it on the floor
as shown in Fig.1.
ATENTION: The assistance of a second person is
advisable for the assembly work
Make sure that all of the pieces are there: (A)
Monitor; (B) Main body; (C) Handrail handlebar; D)
Left-hand focus bar; (E) Right-hand focus bar; (F)
Rear cover for monitor; (G) Bottle; (a) Screw M-
10x70; (b) Screw M-5x10; (c) Nut M8; (d) Screw M-
4x10; (e) Screw M-4x12; (f) Switch; (g) Star drive
spanner; (h) Bottle of lubricant; (i) Mains connection
cable; (j) Combination spanner; (k).
TV support
plate ( Mod G-690 Tv ; (l) Remote control unit( Mod
G-690 Tv ; (m) Allen key.
Follow the assembly instructions step by step:
1 First loosen off the screws (b) on the motor cover
(Q), Fig.2.
Next, insert the focus bar into the bottom right-hand
support on the structure and secure by using screws
(a).
2 Now take the left side bar (E) and insert it into the
bottom left-hand support on the structure and use
screws (a) to secure it.
At least two people are needed for this step.
3 When fitting the side bars, one person should hold
the side bar while the other one fits the screws (a).
This will prevent any possible accidents.
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BH Fitness G690 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BH Fitness G690 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info