528782
16
Zoom out
Zoom in
Previous page
1/55
Next page
16
ASSEMBLY INSTRUCTIONS
Take the unit out of the box and place it on the
floor as shown in Figure 0.
The assistance of a second person is advisable
for the assembly work. Make sure that all of the
pieces are there:
(B) Main structure; (E) Side bar base cover
(Left); (F) Side bar base cover (Right); (a) Allen
screw M5x10; (f) Allen key 6 mm; (g) Safety
key; (i) Bottle of lubricant.
Follow the instructions step by step to
assemble:
1.- First loosen the two top holding knobs (K)
by two turns, anticlockwise, Fig. 1, next take
hold of the handrails (G and H) and lift them in
the direction of the arrow, as shown in Fig. 2,
until you hear the top holding knobs (K) click
into position.
2.- Now loosen off the bottom holding knobs by
two turns (L) Fig. 3.
Holding the handrails (G and H), lift the focus
bars in the direction of the arrow, see Fig. 4,
until you hear the bottom holding knobs (L) click
into position.
NOTE: Make sure that you hear the top holding
knobs click into the handrails and the bottom
knobs click into the focus bars before you let go
of the handrails.
3.- Once you have completed the above,
tighten the top knobs (K) securely, Fig. 5, by
turning them clockwise and the bottom knobs
(L) Fig. 5, by turning it clockwise.
4.- Position the left and right base covers (E)
and (F) in the direction of the arrow facing the
corresponding side bar, as shown in Fig. (6) and
attach them by using screws (a), as shown in
Fig. (6).
ATTENTION:
Cylinder (Q) Fig (7) is factory set
to high pressure so it must not be knocked. If it
is knocked this may damage it and impair the
operation of the treadmill
FOLDING YOUR UNIT
This treadmill is equipped with a safety
release mechanism for folding purposes.
To fold and store the unit follow the instructions
below:
Before attempting to fold the unit, stop the belt,
lower the elevation setting to minimum and
unplug the cable from the mains socket.
To fold the unit follow the instructions below:
First, using one hand, pull the red knob marked
number (1) in the direction of the arrow, Fig. 7A.
Then, without releasing the red knob, use the
other hand to lift the machine, marked number
(2), in the direction of the arrow as shown in Fig.
7A.
Lift and fold the machine up until you hear it lock
into position (O), located at the bottom of the
machine, Fig. 7
Store your unit in a dry place, preferably not
subject to changes in temperature.
UNFOLDING YOUR UNIT
If you wish to use the treadmill, do the reverse
procedure. Use your foot to press lever (O) in
the direction of the arrow as shown in Fig (7)
and slowly lower the treadmill belt down to the fl
oor. When folding or unfolding the treadmill
make sure that there are no children about or
obstacles that might hinder the folding motion.
MOVEMENT & STORAGE
.
The unit is equipped with wheels (P), Fig. (8)
to make it easier to move. Make sure that the
mains cable is unplugged from the wall socket.
If you wish to move the treadmill, the first thing
to do is to fold it up, place your hands on the
handrails (G & H) and tilt the treadmill, Fig (8),
so that the wheels (P) rest on the floor.
To prevent accidents DO NOT move the treadmill
across
uneven floors.
MAINTENANCE
Use the bottle of lubricant (i) to lubricate the
inside of the belt in order to keep your unit in top
condition and to ensure that friction between the
belt and the board is kept to a minimum (due to
different running styles, always apply more
lubrication to the area where you place your feet
during the exercise) It is advisable to lubricate
the base of the belt every 3-12 months,
depending on how often it is used.
If the belt starts to slip after lubrication, then
check the tension of the belt. To tension the
belt, take the 6 mm Allen key (f) and with the
machine set to 4 km/h turn screws (R & L) one
turn in a clockwise direction.
Operating
speed
Recommended lubrication
period
1~6 km 1 year
6~12 km 6 months
12~16 km 3 months
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BH Fitness BG6448N V3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BH Fitness BG6448N V3 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info