715936

Beurer TL 55 - Day and Night Manual

14
Zoom out
Zoom in
Previous page
1/88
Next page
14
5. Initial use
Take the device out of the plastic wrapping. Check the device for damage or faults. If you notice any damage or
faults on the device, do not use it and contact Customer Services or your supplier.
Positioning the device
Place the device on an even surface. The position should be chosen to ensure a distance of around 10 cm to
25 cm between the user and the device.
Battery use / Charging the battery
In order to use the daylight therapy lamp with the integrated battery, you must first of all charge it.
• To prevent possible damage to the daylight therapy lamp, it must only be charged with the mains part
included in delivery. The mains part must only be connected to the mains voltage that is specified on the
type plate.
• Insert the mains part into the mains part connection on the rear of the daylight therapy lamp.
•
Plug the other end of the mains part into a suitable socket. Fully charge the battery prior to initial use (ap-
prox. 2 hours). During charging, the "CHG" display on the daylight therapy lamp lights up green. When the
battery is fully charged, the "CHG" display goes out.
•
If you would like to use the daylight therapy lamp after charging, first of all disconnect the mains part
from the socket, and then from the daylight therapy lamp.
• With the battery completely charged, you can operate the daylight therapy lamp for over 2 x 30 minutes.
Note:
• Ensure that there is a mains socket close to the set-up area.
• Arrange the mains cable so that no-one will trip over it.
6. Operation
1
Remove the stand from the storage slot on the rear of the device.
2
Clip the short end of the stand into the side. The orientation of the TL55 changes depending on where
you attach the stand to the device. The stand can be attached on both the long and short sides, which
enables you to use the TL55 both horizontally and vertically.
3 Switching on the lamp
To switch on the red light (light to fall asleep), press the ON/OFF button once.
Press the ON/OFF button twice to switch on the brightlight.
Note:
The daylight therapy lamp has an automatic switch-off function. The brightlight/red light switches
off automatically after 30 minutes. During the 30 minutes, the red light automatically dims. In con-
trast, the brightlight illuminates to the same level of brightness for the 30 minutes.
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beurer TL 55 - Day and Night at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beurer TL 55 - Day and Night in the language / languages: English, German, Danish, French, Italian, Polish, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 6,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info