533689

Beurer MPE 38 Manual

10
Zoom out
Zoom in
Previous page
1/48
Next page
10
Important
Only insert UV-9W-L type fluorescent tubes into the device.
To replace the fluorescent tubes, follow the steps contained in section “3. Initial use”.
Cleaning
Warning
Before beginning cleaning, pull the mains plug out of the socket!
•
Clean the base plate after each use.
•
Clean the surface of the device and the base plate carefully using a slightly damp cloth only.
•
Do not use any cleaning agents or solvents.
6. What if there are problems?
Problem Possible cause Solution
Device will not switch
on.
Mains plug not plugged in. Insert the mains plug into the socket.
No voltage at mains socket. Check your fusebox.
UV nail gel does not dry. Treatment time with UV light too short. Set a longer UV light treatment time.
UV fluorescent tube
does not light up.
UV fluorescent tube not correctly
inserted.
Check that the UV fluorescent tube has
been correctly inserted.
UV fluorescent tube faulty. Insert a new UV fluorescent tube.
7. Replacement parts and wearing parts
Replacement parts and wearing parts are available from the corresponding service address (according to the
service address list). Please state the corresponding order number.
Designation Item number and/or order number
UV fluorescent tubes, 4 units 163.290
8. Disposal
Observe the local regulations for material disposal. Dispose of the unit in accordance with EC Directive
2002/96/EC – WEEE (Waste Electrical and Electronic Equipment). If you have any questions, please
contact the local authorities responsible for waste disposal.
9. Technical data
Model no. MPE 38
Dimensions L220 x W210 x H100 mm
Weight 1610 g (including UV fluorescent tubes)
Power supply 230 V, ~ 50 Hz
Nominal power 36 W
Permissible storage conditions Store in a clean and dry place
Number of UV lamps 4
UV lamp type UV-9 W-L 365 nm, 9 W
UV type of device UV-A lamp type 3
Switch-off times 120 seconds, continuous operation
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beurer MPE 38 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beurer MPE 38 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 4,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info