533689

Beurer MPE 38 Manual

9
Zoom out
Zoom in
Previous page
1/48
Next page
9
Before you can begin using the UV nail dryer, you must insert the UV fluorescent tubes.
In order to do this, follow the steps below:
1. Remove the base plate. 2. Carefully insert the fluorescent tubes into the
sockets.
Important
Ensure that the brass terminals are correctly
inserted.
3. Insert the base plate.
4. Operation
Drying UV nail gel
1.
Insert the mains plug into the socket.
2.
There are two different UV light exposure settings available (120-second timer and continuous operation).
3.
To set the exposure time to 120 seconds, set the switch to Timer On. Then press the Start button. The UV
light will light up for 120 seconds. The UV light will automatically go off after 120 seconds. The majority of
commercially available UV nail gels have a curing time of 120 seconds. For more information, please ob-
serve the information from the corresponding nail gel manufacturer. After the 120 seconds, you can restart
the 120-second timer by pressing the Start button.
To set the exposure time to “Continuous operation”, set the switch to
. The UV light will light up
continuously. This mode is required for gels with a shorter or longer curing time than 120 seconds.
4.
Insert your nails varnished with UV nail gel into the opening in the device (with your nails facing upwards).
5.
Switch the device off once you have finished using it. For this purpose, set the switch to the centre position
and disconnect the device from the mains.
5. Maintenance and cleaning
Replacing the fluorescent tubes
If one of the four fluorescent tubes ceases to work properly, replace all four fluorescent tubes.
You can order the required fluorescent tubes from Customer Services.
Warning
Before replacing the fluorescent tubes, pull the mains plug out of the socket!
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beurer MPE 38 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beurer MPE 38 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 4,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info