16
Reassembling the air washer
After cleaning, reassemble the air washer in reverse order. Ensure that the fan unit engages flush with the
device and that the 4 locks are fully moved to the inside.
Storage
If you do not plan to use the device for a relatively long period of time, we recommend that you thoroughly
empty, clean and dry the device and store it in the original packing in a dry environment, ensuring it is not
weighed down with additional items.
8. What if there are problems?
Problem Cause Solution
Empty display. The device is not connected to mains
power supply.
Connect the mains plug and switch
on the device.
Empty display. The device has switched itself off due
to safety reasons.
Clean and refill the device before next
use. Then switch it on again.
The upper cover can-
not be fitted precisely.
The guide rails do not fit and the up-
per cover is jammed.
Turn the upper cover around by 180°
and reposition it on the tub.
The water level gauge
always shows the
same fill level despite
differing water levels.
The fill level sensor is dirty. Lift off the upper cover from the tub,
pull off the fill level sensor protective
cap and clean the fill level sensor.
9. Replacement parts/water additives
The “LW110 Fresh” water additive and the “LW110 Antical” cleaning solution can be obtained from
your retailer as a care set under the number 162.844. Only original parts and cleaning solutions from the
manufacturer may be used.
10. LW 110 technical data
Dimensions (L x W x H) 30 x 30 x 34 cm
Cable length approx. 2 m
Weight when empty approx. 5.8 kg
Mains voltage 220 – 240 volts / 50 – 60 Hz
Motor output 25 watts
Suitable for rooms up to 36 m²
Maximum capacity approx. 7.25 litres
11. Warranty and service
The product comes with a 3-year warranty (from the date of purchase) against material and production faults.
The warranty does not cover:
•
damage due to improper operation,
•
wearing parts,
•
deficiencies already known to the customer upon purchase
•
cases of personal negligence on the part of the customer.
Warranty claims shall not affect the customer's statutory rights. To assert a warranty claim within the warranty
period, the customer must provide proof of purchase.
The warranty claim must be submitted within a period of 3 years from the date of purchase to Beurer GmbH,
Söflinger Straße 218, 89077 Ulm, Germany. In the event of a warranty claim, the customer has the right to
repair of the goods at our own workshop or at a workshop authorised by us. No further rights are granted to
the customer (on the basis of the warranty).
753.899 – 0710 Irrtum und Änderungen vorbehalten
