Manual Beurer IH 58 (page 22 of 96) (English, German, French, Italian, Polish, Turkish, Spanish)

715723

Zoom out

Zoom in

1/96

Problem/

question

Possible cause/remedy

The atomiser

produces no

or too little

aerosol.

4. Unsuitable medication fluid added

for nebulisation (e.g. too viscous).

The medication fluid should be pre

scribed by the doctor.

The output is

too low.

Kinked hose, clogged filter, too much

inhalation solution.

What med

ications are

suitable for

inhaling?

Please consult your doctor in rela

tion to this matter.

As a rule, all medication that is

suitable and approved for device

inhalation can be inhaled.

There is inha

lation solution

residue in the

atomiser.

This is normal and is due to technical

reasons. Stop inhalation once the

atomiser starts to make a notably

different sound.

What should

be taken into

account when

using the

device with

infants and

children?

1. On infants and children, the mask

should cover the mouth and nose

to ensure effective inhalation.

2. On children, the mask should also

cover both the nose and mouth.

It is not a good idea to carry out

nebulisation on someone who

is sleeping, as in this case not

enough of the medication will

reach the lungs.

Note: Inhalation should only be car

ried out under the supervision of an

adult and with their assistance and

the child should not be left alone.

Inhalation us

ing the mask

takes longer.

This is due to technical reasons. You

breathe less medication per breath

through the holes of the mask than

via the mouthpiece. The aerosol is

mixed with ambient air via the holes.

Problem/

question

Possible cause/remedy

Why should

the atomiser

be replaced

regularly?

There are two reasons for this:

1. To ensure a therapeutically effec

tive particle spectrum, the nozzle

hole must not exceed a specific

diameter. Due to mechanical and

thermal stresses, the plastic is

subject to a certain degree of

wear. The atomiser insert [9] is

particularly sensitive. This can also

alter the composition of the aero

sol droplets, which directly affects

the effectiveness of the treatment.

2. Regularly changing the atomiser

is also recommended for hygiene

reasons.

Should each

person have

their own

atomiser?

Yes, this is absolutely essential for

hygiene reasons.

11. Technical specifications

Type

IH58

Dimensions

(W x H x D) 110 x 62 x 47 mm

Weight

176 g

Operating

pressure Approx. 0.25 to 0.5 bar

Atomiser filling

volume

Min. 2ml

Max. 6ml

Medication

flowrate Approx. 0.25ml/min.

Sound pressure Max. 45 dBA

(acc. to DIN EN 13544-1 section 26)

Mains connection Input: 100 – 240 V~; 50 – 60 Hz; 0.5 A

Output: 5 V

; 2 A

Expected

servicelife

400 h

Operating

conditions

Temperature: +10 °C to +40 °C

Relative humidity: 10% to 95%

Ambient pressure: 700 to 1060 hPa

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Beurer IH 58 in the language / languages: English, German, French, Italian, Polish, Turkish, Spanish as an attachment in your email.

The manual is 8,4 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Beurer IH 58 Manual

Product: