Manual Beurer IH 18 (page 16 of 72) (English, German, French, Italian, Polish, Turkish, Spanish)

568811

Zoom out

Zoom in

1/72

when in contact with the skin or mucous membranes,

or when swallowed or inhaled.

Clean the device using a damp cloth, to which you can

apply a little detergent if necessary.

Do not use abrasive detergents and never immerse

the unit in water.

Important

•

Ensure that no water penetrates inside the unit!

•

Do not put the device or accessories in a dishwasher.

•

Do not touch the unit with wet hands while it is

plugged in; do not allow any water to be sprayed

onto the unit. The unit must be operated only when

it is completely dry.

•

Do not spray any liquids into the ventilation slots. Any

liquid that penetrates into the unit can damage the

electrical parts or other components of the nebuliser

and impair the function of the device.

Condensation, care of the hose

Depending on the environmental conditions, con-

densation may collect in the hose. To prevent against

bacterial growth and to ensure effective therapeutic

use, this moisture must always be removed. To remove

moisture from the hose, proceed as follows:

•

Remove the hose [6] from the atomiser [7].

•

Leave the hose plugged into the nebuliser [4].

•

Run the nebuliser until all the moisture has been dis-

placed by the flow of air.

•

In the event of significant contamination, replace the

hose.

Disinfection

Follow the steps listed below carefully in order to disin-

fect your atomiser and the accessories. It is advisable

to disinfect the individual components after the last

time they are used each day at the latest.

(For disinfection, you will simply require a small amount

of clear vinegar and distilled water).

• First clean the atomiser and the accessories as de-

scribed under “Cleaning”.

• Make up a vinegar solution consisting of 1⁄4 vinegar

and 3⁄4 distilled water. Ensure that there is sufficient

solution to fully immerse all parts such as the nebu-

liser, mask, and mouthpiece.

• Leave the components in the vinegar solution for 30

minutes.

• Rinse the atomiser and the individual components

(mask/mouthpiece etc.) with water.

• Carefully dry all components using a soft cloth.

• Once all components are fully dry, reassemble the

atomiser and place the components in a dry, sealed

container.

Note

Please ensure that the parts are completely dried af-

ter cleaning, otherwise the risk of bacterial growth is

increased.

Drying

•

Place the individual components on a dry, clean and

absorbent surface and allow to dry completely (for

at least 4 hours).

Material resistance

•

As with all plastic components, frequent use and

cleaning of the atomiser and the accessories can

lead to a certain amount of wear. Over time, this can

alter the aerosol properties and may eventually affect

the efficiency of therapy. We therefore recommend

that you replace the atomiser once a year.

•

When choosing a cleaning or disinfecting agent, note

the following: Only use mild cleaning or disinfect-

ant agents in the quantities recommended by the

manufacturer.

Warehousing

•

Do not store the nebuliser in a damp atmosphere

(e.g. in the bathroom) or transport it together with

damp objects.

•

Store and transport the nebuliser away from direct

sunlight.

Storage

•

The accessories can be safely stored in the acces-

sories compartment [4]. Store the device in a dry

place, if possible in its original packaging.

9. Disposal

In the interest of environmental protection, do not dis-

pose of the device in household waste.

Please dispose of the device in accordance with

EC Directive – WEEE (Waste Electrical and Elec-

tronic Equipment).

If you have any queries, please contact the ap-

propriate local authorities.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Beurer IH 18 in the language / languages: English, German, French, Italian, Polish, Turkish, Spanish as an attachment in your email.

The manual is 7,4 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Beurer IH 18

Beurer IH 18 User Manual - Dutch - 12 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Beurer IH 18 Manual

Product: