568811
14
Zoom out
Zoom in
Previous page
1/72
Next page
14
Connect the other end of the hose [6] to the hose
connector [4] on the nebuliser by lightly turning it.
Mains connection
Connect the unit only to the mains voltage listed on
the type plate.
Insert the mains cable plug [1] into a suitable socket.
Push the plug completely into the mains socket.
Note
Ensure that there is a socket near to where the unit
will stand.
Lay the mains cable in such a way that no one can
trip over it.
To disconnect the nebuliser from the mains after use,
first switch off the device and then remove the plug
from the socket.
6. Operation
Caution
For hygiene reasons, the atomiser [7] and the ac-
cessories must be cleaned after each treatment and
disinfected after the last treatment of the day.
If several different medicines are to be inhaled in suc-
cession during therapeutic use, the atomiser [7] must
be rinsed under warm tap water after each use. For
information about this, see “Cleaning and disinfec-
tion” on page 15.
Follow the instructions for changing the filter con-
tained in these instructions.
Before each use, check that the hose connections
on the nebuliser [4] and the atomiser [7] are tight.
Before use, check that the device is functioning cor-
rectly. To do this, switch on the nebuliser (including
the connected atomiser, but without any medication)
for a short time. If the atomiser [7] expels air, the
device is functioning correctly.
1. Inserting the nozzle attachment
• Toopentheatomiser[7],twisttheuppersectionanti-
clockwise against the medicine container [9]. Place
the nozzle attachment [8] in the medicine container
[9].
2. Filling the atomiser
• Pouranisotonicsalinesolutionor
the medicine directly into the med-
icine container [9]. Do not overfill!
The maximum recommended fill
level is 6 ml !
• Usemedicationonlyontheadvice
of a physician, and check the ap-
propriate inhalation duration and
quantity for your needs.
•
If the required volume of medi-
cation is less than 2 ml, top up this quantity to at
least 4 ml using an isotonic saline solution. Viscous
medicines may also require dilution. Always follow
the instructions of your doctor.
3. Closing the atomiser
•Toclosetheatomiser[7],twisttheuppersection
clockwise against the medicine container [9]. Ensure
the parts are connected correctly.
4. Connecting the accessories to the atomiser
Connect the required accessory part (mouthpiece [10],
adult mask [11] or child mask [12]) to the atomiser [7].
Before commencing treatment, pull the atomiser
upwards out of its holder [5].
Start the nebuliser using the on/off switch [3].
A flow of spray from the atomiser indicates that the
device is functioning properly.
Note
The most effective method of nebulisation is by us-
ing the mouthpiece. Nebulisation using a mask is only
recommended if it is not possible to use a mouthpiece
(e.g. for children who are not yet able to inhale medica-
tion using a mouthpiece).
Before commencing treatment, pull the atomiser
upwards out of its holder [5].
Start the nebuliser using the on/off switch [3].
A flow of spray from the atomiser indicates that the
device is functioning properly.
5. Treatment
Inhale the nebulised medicine deeply.
Note
During treatment, hold the atomiser straight (vertical),
otherwise the atomisation does not work and correct
function cannot be guaranteed.
8
9
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beurer IH 18 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beurer IH 18 in the language / languages: English, German, French, Italian, Polish, Turkish, Spanish as an attachment in your email.

The manual is 7,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Beurer IH 18

Beurer IH 18 User Manual - Dutch - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info