Manual Beurer HK 70 (page 16 of 76) (English, German, French, Italian, Polish, Turkish, Spanish)

715877

Zoom out

Zoom in

1/76

Push the rectangular securing catch through from the front to

the back between the seat and backrest, and orient the securing

catch vertically at the back.

Then attach the clip to the headrest support. To do so, slide the

two ends apart towards the sides, as shown in the diagram.

Then use this opening to guide the clip over the headrest support

so that it can be closed again.

Close the clip by pressing it together until it securely encloses

the headrest support.

The car fastening straps must not cross one another, be entangled, or be mounted with the loop side facing

the seat.

Now take the heat pad in your hand, open the covers of the 4 hook-and-loop points on the rear, hold the

heat pad against your back with the curved side at the level of the lumbar vertebrae, and lean back against

the backrest.

Then check the hook-and-loop connection. If the hook part does not lie fully on the loop part, you can now

correct it, continuing until all 4 points are securely fastened.

You can change the position of the cushion at any time using the hook-and-loop fasteners on the rear of

the heat pad.

Removal of car fastening straps from car seat

To open the clip, slide the two ends apart again towards the sides.

Then push the rectangular securing catch through from the back to

the front between the backrest and the seat.

Car seat

rear

Headrest

support

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Beurer HK 70 in the language / languages: English, German, French, Italian, Polish, Turkish, Spanish as an attachment in your email.

The manual is 8,79 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Beurer HK 70 Manual

Product: