537053
23
Zoom out
Zoom in
Previous page
1/36
Next page
Beurer GL44 mmol/L 23
3
The device automatically switches on and briefly shows the start display. The device is ready
for measurement as soon as the hand and the symbol flash.
IMPORTANT: Control solutions and blood react to temperature influences in dierent ways.
It is therefore of vital importance that control solution measurement is always performed in
control solution mode. If this mode is not used, results may be obtained that are outside the
target range.
Note
Press the rocker switch “+” or “–” to change to the control mode. “
” is shown on the dis-
play. This means that the result value is not stored in the memory, therefore not influencing
your measured value statistics. Press “+” or “–” again. “ ” disappears from the display and
the value is stored normally in the memory.
4
A clean surface is required to perform a correct functional test.
Shake the control solution well before use.
Undo the cap and press two drops next to each other on the
clean surface without touching them. Use the second drop for
the measurement.
Note
Do not apply the drop directly to the test strip to avoid contaminating the remaining control
solution in the bottle by touching the test strip with the tip of the bottle.
5
Hold the input gap (at the tip of the test strip) to the drops of control solution until the gap is
completely filled and the measuring device in the display starts counting backwards.
If the gap is suciently filled with solution, the device performs a measurement. The devices
counts down for approx. five seconds. The measured result is subsequently shown on the
display.
6
Check whether the result is within the specified range of results for the control solution. This
range of results is printed on the test strip box.
Expected results
At room temperature, the measured values of the test using the control solution should be within the
range printed on the test strip box in approx. 95 % of all tests.
Warning
The result range printed on the test strip box applies only to the control solution. This is not a rec-
ommended value for your blood glucose level.
If measured values are outside the specified range, check the following possible causes:
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beurer GL 44 mmol L at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beurer GL 44 mmol L in the language / languages: English as an attachment in your email.

The manual is 6,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Beurer GL 44 mmol L

Beurer GL 44 mmol L User Manual - German - 40 pages

Beurer GL 44 mmol L User Manual - Dutch - 40 pages

Beurer GL 44 mmol L User Manual - French - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info