715863

Beurer EM 49 Manual

32
Zoom out
Zoom in
Previous page
1/148
Next page
32
3. Use the ˄/˅ setting buttons to select the impulse frequency you
want and use the ENTER button to confirm.
4. Use the ˄/˅ setting buttons to select the impulse width you want
and use the ENTER button to confirm.
5.Use the ˄/˅ setting buttons to select the treatment time you want
and use the ENTER button to confirm.
6.Use the left and right ˄/˅ setting buttons for and
to
select the impulse intensity you want.
TENS 14 program
The TENS 14 program is a burst program that you can also
customise. Various impulse sequences run in this program. Burst
programs are suitable for all areas of application to be treated with
changing signal patterns (to minimise the level of accustoming to
the treatment). In this program you can set an impulse width of
between 80 and 250 µs.
1. Place the electrodes on the desired area for treatment (for
positioning suggestions see electrode positions in section 6.4)
and connect them to the device.
2. Select the TENS 14 program as described in section “5.2 Starting
application” (step 3 to step 5).
3. Use the ˄/˅ setting buttons to select the impulse width you want
and use the ENTER button to confirm.
4.Use the ˄/˅ setting buttons to select the treatment time you want
and use the ENTER button to confirm.
5.Use the left and right ˄/˅ setting buttons for and
to
select the impulse intensity you want.
TENS 15 program
TENS 15 is a program that you can also customise. In this program,
you can set the impulse frequency to between 1 and 150 Hz.
The impulse width changes automatically during the stimulation
treatment.
1. Place the electrodes on the desired area for treatment (for
positioning suggestions see electrode positions in section 6.4)
and connect them to the device.
2. Select the TENS 15 program as described in section “5.2 Starting
application” (step 3 to step 5).
3. Use the ˄/˅ setting buttons to select the impulse frequency you
want and use the ENTER button to confirm.
4.Use the ˄/˅ setting buttons to select the treatment time you want
and use the ENTER button to confirm.
5.Use the left and right ˄/˅ setting buttons for and
to
select the impulse intensity you want.
EMS 33 program
EMS 33 is a program that you can also customise. In this program,
you can set the impulse frequency to between 1 and 150 Hz and the
impulse width to between 80 and 320 µs.
1. Place the electrodes on the desired area for treatment (for
positioning suggestions see electrode positions in section 6.4)
and connect them to the device.
2. Select the EMS 33 program as described in section “5.2 Starting
application” (step 3 to step 5).
3. Use the ˄/˅ setting buttons to select the impulse frequency you
want and use the ENTER button to confirm.
4. Use the ˄/˅ setting buttons to select the impulse width you want
and use the ENTER button to confirm.
5.Use the ˄/˅ setting buttons to select the treatment time you want
and use the ENTER button to confirm.
6.Use the left and right ˄/˅ setting buttons for and
to
select the impulse intensity you want.
EMS 34 program
EMS 34 is a program that you can also customise. In this program,
you can set the impulse frequency to between 1 and 150 Hz and
the impulse width to between 80 and 450 s. You can also set the
… 32 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beurer EM 49 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beurer EM 49 in the language / languages: English, German, French, Italian, Polish, Turkish, Spanish as an attachment in your email.

The manual is 17,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Beurer EM 49

Beurer EM 49 User Manual - Swedish - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info