715830
49
Zoom out
Zoom in
Previous page
1/232
Next page
49
8.3 Taking the ECG measurement
1. Press the START/STOP button to turn on the device. The device is now in ECG measurement
mode. You can now switch between the user memory ( / ) by press and hold the buttonM
for 3 seconds.
2.
Put your index finger and middle finger or your thumbs of both hands on both electrodes. The Meas-
urement starts automatically if there is sucient contact to the electrodes and the signal is stable.
The force should be kept constant during the measuring period. Do not press the elec-
trodes too hard. Excessive muscle tension might affect the accuracy of measurement
result.
Make sure both hand´s index fingers and middle fingers or thumbs are in sufficient contact
with the two electrodes.
3. A countdown on the left side of the display indicates the progress of the measurement. During
the measurement, the current heart rate is displayed in real time. The symbol
will flash and
the sound (if applicable) will beep in sync with your heart beat.
4. A summary of the ECG measurement and the average heart rate appear on the display after the
countdown has elapsed.
5. To switch off the device, press the START/STOP button . Alternatively, the device will switch
off automatically after 2 minutes.
6. You may repeat the above procedure to take the ECG Measurment.
8.4 Evaluating ECG measured values
Once you have taken the measurement, the following results may appear on the LCD display.
ECG recording is OK.
Indicates one or more pauses in the car-
diac cycle, each of which is longer than
2seconds.
Indicates a decreased heart
rate (bradycardia) of less
than 60 [bpm].
Indicates a disruption to the rhythm during
the ECG recording.
Indicates an increased
heart rate (tachycardia) of
greater than 100 [bpm].
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beurer BM 93 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beurer BM 93 in the language / languages: English, German, French, Italian, Polish, Turkish, Spanish as an attachment in your email.

The manual is 12,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info