Manual Beurer BM 16 (page 16 of 68) (English, German, French, Italian, Polish, Turkish, Spanish)

470363

Zoom out

Zoom in

1/68

The WHO classification in the display shows the range of the

measured blood pressure.

If the values for systolic and diastolic pressure are in two

different WHO ranges (e.g. systolic in the grade

hypertension

range and diastolic pressure in the normal range), the WHO

classification on the unit always indicates the higher range

(grade

hypertension in the example described).

6. Saving, retrieving and deleting results

The computer automatically saves the blood pressure

readings of the last 50 measurements. When the 50

memory locations are exceeded, the current oldest value

is deleted.

You can display the memory as follows:

• Press the “User-Switching key”

to select a memory

zone, and press the “M” key to switch from memory to

memory with sequence numbers.

• The saved measured values are continuously stored.

• Press the On/Off switch

to turn the unit off.

• If you forget to switch off the computer, it will switch off

automatically after 1 minute.

Press the “User-Switching key”

to select a memory

zone, then press and hold the “M” key for approximately

5-seconds to clear the data in the pre-designated memory

zone. The data in both memory zones – zone 1 and zone 2 may

be erased if any of the batteries is removed.

7. Cleaning and storing the instrument

• Clean your blood pressure computer carefully only with a

slightly moistened cloth.

• Do not use detergents or solvents.

• On no account must you immerse the computer in water,

otherwise liquid can enter it and cause demage.

• When storing the device, make sure that no heavy objects

are placed on top of it. Remove the batteries. The cuff tube

should not have any sharp kinks.

8. Rectifying faults

Error messages can occur when

• the blood-pressure value is unusually high or low („EE“ ap-

pears in the display),

• you move or talk during the measurement („EE“ appears in

the display),

• the cuff tube is not properly inserted („E1“ appears in the

display),

• inflation takes longer than 20 seconds („E1“ appears in the

display),

• the inflation pressure is higher than 300 mmHg („E2“ appears

in the display),

• an error occurs when storing the measured values („E3“ ap-

pears in the display).

• Exceeding measurement range („Er“appears in the display).

In the about cases, you must repeat the measurement. Make

sure that the cuff tube is properly inserted and that you do not

move or talk. Put the batteries back in if necessary, or else

replace them.

9. Specifications

Model No. BM 16

Method of Measurement Oscillometric, non-invasive blood

pressure measurement on the upper

arm

THE BLOOD MONITOR DOES NOT TURNINIG ON,BEFORE IT WORK CORRECTLY WITH THE SPECIAL ADAPTER Submitted on 29-1-2022 at 19:09
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Beurer BM 16 in the language / languages: English, German, French, Italian, Polish, Turkish, Spanish as an attachment in your email.

The manual is 4,12 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Beurer BM 16

Beurer BM 16 User Manual - Dutch - 12 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Beurer BM 16 Manual

Product: