784589
6
Zoom out
Zoom in
Previous page
1/28
Next page
SPA SUCTION FITTING INSTRUCTIONS
When installing and using this equipment, basic safety precautions shall always be
followed, including the following:
IMPORTANT SAFETY INSTRUCTIONS
READ, FOLLOW, AND UNDERSTAND ALL
INSTRUCTIONS AND WARNINGS.
Any modification that increases the flow rate of the circulation system shall require
re-evaluation of the cover/grate and sump to ensure that the flow rating of the Suction
Outlet Fitting Assembly (SOFA) is not exceeded.
• Missing, broken, or cracked cover/grates, sumps, mud-frames, or any other SOFA
component shall be replaced before bathers are allowed to use the pool.
• Loose cover/grates shall be reattached before bathers are allowed to use the pool.
1. Replace suction fittings every 3 years.
2. The use of adhesives or other attachment methods that prevent access to suction
piping or SOFA components requiring periodic servicing is prohibited.
3. Refer to the following diagram for each SOFA component part instructions:
4. Any field modification made to a SOFA not authorized by the manufacturer’s installation
instructions shall void the SOFA certification.
• No modification shall be made to a SOFA structure or flow path unless the new
configuration has been certified as new SOFA.
• Cover/grates and all other SOFA components shall be replaced at or before the end of
their service life and that service life begins the month and year in which a SOFA
component is installed with or without water.
5. Winterizing instructions. Dry the suction fittings completelyand store the product in a
dry room at a storage temperature of 59ºF~104°F
(
15
°C
~40
°C)
.
• Cover/grate, including fasteners, shall be observed for damage or tampering each
operational day.
• Missing, broken, or cracked cover/grates shall be replaced before bathers are allowed
to use the pool.
• Loose cover/grates and associated components shall be reattached before bathers are
allowed to use the pool.
• SOFA components and fastener receptacles shall be clean and free of debris or
obstructions during installation of cover/grate and fasteners.
• Remember to hand-check cover/grate for snugness to the sump/ frame after
installation.
6. Before using the product, please check the integrity of the head of the suction fitting. If
the product is broken, please do not use it.
7. All SOFAs shall be installed in accordance with the manufacturers installation
instructions.
• No modification shall be made to a SOFA structure or flow path unless the new
configuration has been certified to the original SOFA.
These SOFA-configuration specific flow ratings NOT be exceeded at any time the pool
is open to bathers.
• Cover/grates, when installed, shall not protrude more than 2 in. (51 mm) from the
finished surface of the pool in which the SOFA is installed.
8.
Please research and download General Certificate of Conformity through
www.bestwaycorp.com
SAVE THESE INSTRUCTIONS
Only for Drop stitch Spa
S01 S01
6
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bestway SaluSpa at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bestway SaluSpa in the language / languages: English as an attachment in your email.

The manual is 2.99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info