753194

Bestway 58517 Manual

3
Zoom out
Zoom in
Previous page
1/60
Next page
Suitable for in-ground pools or above ground metal frame pools (Pool size: length≥4.57 m(15’), width≥2.44 m(8’), depth≥1 m(39.5”))
Suggested water temperature range: 15-35°C
Speed range (Approximate):
Frequency band: 433.92 MHz
Maximum radio-frequency power: 8 dBm
No.
1
2
3
4
5
6
Item
P04752
P04753
P04754(EU)/
P04875(GB)/
P04874(CH)
P04755
P04756
P04757
Description
Remote control
Swim fitness system
Transformer
Mounting bracket
Screws
Set screw
QTY
1
1
1
1
2
1
2
0.74
0.81
3
0.83
0.91
4
0.92
1.01
5
1.01
1.10
6
1.10
1.20
7
1.19
1.30
8
1.30
1.42
INTENSITY LEVEL
m/s
yd/s
1
0.65
0.71
1
3
4
5
6
2
Display Panel Function:
A Digital display window
Display current mode parameters
B Calorie counter mode
1. Press this button in free running mode, the digital screen
displays the calorie interface
2. Press and hold this button in any state to enter the
calorie consumption mode setting interface, and the
calorie consumption mode button indicator will flash.
Press the “+/-” button to set the parameter increase or
decrease (range 10-1000 cal). After the setting is
completed, press the start button to start the
operation.
C Timer mode
1. Press this button in free running mode, the digital screen
displays the time interface
2. Press and hold this button in any state to enter the
timing mode setting interface, and the timing mode
button indicator will flash. Press the “+/-” button to set
the parameter increase or decrease (range 5-90 minutes). After the setting is completed, press the start button to start the
operation.
D Distance mode
1. Press this button in free running mode, the digital screen displays the distance interface
2. Press and hold this button in any state to enter the distance mode setting interface, and the m/yd indicator will flash. Press the
“+/-” button to set the parameter increase or decrease (range 10-5000 m/10-5500 yards). After the setting is completed, press
the start button to start the operation. (Pressing this button without holding it down will switch between m/yd units)
E Stop button
1. In all cases except the standby state, press the stop button to clear the current data and the machine will enter the standby state.
2. When the fault code is reported, press this button to cancel the fault and the machine enters the standby state.
F Speed and parameters adjustment buttons
During operation, you can accelerate or decelerate by pressing the “+/-” key; in the mode setting, you can set the parameter to
increase or decrease by pressing the “+/-” key.
G Start/pause button
1. Press this button in the standby mode to enter the free mode, and press this button to pause during operation. The machine will
stop automatically after a maximum of 90 minutes of operation.
2. After the calorie consumption, timing or distance mode setting is completed, press this button to start running. Press this button to
pause during operation.
H LED light switch button
Press to turn on/off the LED light
I Distance unit indicator
m/yd indicator
J I H G
A B C D E F
3
3 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bestway 58517 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bestway 58517 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 7,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info