6943
46
Zoom out
Zoom in
Previous page
1/88
Next page
Instructions for use Automatic breadmaker
DBM2007
v 040908-02

Never use the appliance with a damaged power cord.
Never place the breadmaker in the vicinity of hot appliances such as ovens, hobs,
gas burners, or other burners.
To avoid damage, never put the hot baking tin on top of the appliance.
Never expose the appliance to direct sunlight, heat, or moisture.
Never clean the appliance with abrasive cleaners.
Always make sure that the baking tin is positioned correctly before switching on the
appliance.
Always remove the plug from the wall socket when the appliance is not in use, in
the event of a malfunction, and when you wish to clean the appliance.
,QWURGXFWLRQ
The delicious smell of homemade bread is an unforgettable experience. Warm, fresh
homemade bread spread with butter is a tremendous sensation. Your Bestron
Breadmaker DBM2007 will enable you to enjoy this sensation every day. Moreover the
breadmaker will enable you to experience the enjoyment of homemade bread every day
– and prepared with the greatest of ease. The appliance is fitted with a small computer
that does all the work for you.
1. Add the ingredients to the breadmaker.
2. Select and start the program.
3. Wait until your fresh and warm bread is ready.
You can use your breadmaker to bake many different types of bread. Moreover you can
also use the appliance to make jams – and dough for rolls, pizzas, and cakes. It’s all
very simple, and the result tastes like the produce prepared by a traditional baker.
It is recommended that you read these instructions carefully before using your
breadmaker for the first time. Please pay particular attention to these safety
precautions.
1. Carefully take your new breadmaker out of the packaging, and remove all
packaging materials.
2. Remove any dust from the appliance that may have been trapped in the packaging.
3. Clean your breadmaker with a damp cloth. Remember that the baking tin is
finished with a non-stick coating. Consequently do not clean the tin with scouring
agents.
4. Before using the breadmaker for the first time grease the baking tin (with non-stick
coating) with oil or margarine. Then switch on the appliance (without other
ingredients) for about 3 to 5 minutes. (Do this using a baking program.)
5. Allow the appliance to cool down, and repeat the procedure.
6. Fit the kneading blades to the drive shafts.
It was necessary to lubricate the components of this appliance during its manufacture,
and for this reason the breadmaker may release traces of smoke when used for the first
time. However, this is absolutely normal.
The breadmaking programs are started using the display’s Start/Stop button. If nothing
is seen on the display when the appliance’s plug is inserted in the wall socket, then
check whether the main switch under the breadmaker is switched to “I” (On).
BA04-008_DBM2007.book Page 44 Tuesday, September 7, 2004 1:41 PM
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bestron DBM2007 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bestron DBM2007 in the language / languages: Dutch as an attachment in your email.

The manual is 2,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info