702402

Bestron AAC9000 Manual

45
Zoom out
Zoom in
Previous page
1/75
Next page
45
EN
USAGE - Turning on and off
1. Put the plug in the socket. The devices peeps, which is normal. The display (figure 1, A) indicated the
current room temperature.
2. Push the button “power” (I). The device starts functioning in the last used mode. When you turn the
device on for the first time, it is in the cooling mode. The indication light above the button “mode” lights
up.
3. Set the desired direction of the air stream. Aim the air stream right ahead, or slightly downward by
manually setting the horizontal slats (4) in desired position. You can easily turn of move the device with
the sturdy castor wheels to direct the airstream into the room.
4. Push the button “power” again to turn the device off.
5. After use, pull the plug from the socket.
USAGE - Setting the mode
The device has three operating modes, with which you can ventilate, dehumidify, and cool the room.
Ventilating
1. Press the button “mode” (figure 1, G), until the indication light lights up at “fan”. The device is now
functioning as a ventilator.
2. Press the button “speed” (D) to change between low or high speed exhaust air. The indication light lights
up at “low” (low speed) or “high” (high speed).
3. Press the “swing” button to activate the swing position. This leaves the air flow from the leftmove to the right.
Dehumidifying
1. Press the button “mode” (figure 1, G) once or multiple times, until the indication light lights up at “dehum”.
The device switches to the lowest speed, and will now dehumidify the air.
Cooling
1. Press the button “mode” (figure 1, G) once or multiple times, until the indication light lights up at “cool”.
The device is now functioning as an air cooler, and will cool the air by means of a cooling element.
2. Use the buttons “up” (E) and “down” (F) to set the cooling temperature between 16°C and 31°C.
3. Press the button “speed” (D) to switch between a low or high speed of exhaust air. The indication light
lights up at “low” (low speed) and “high” (high speed).
4. Press the “swing” button to activate the swing position. This leaves the air flow from the left move to the right.
ATTENTION:
• When the internal water collection tray is full, the device stops functioning, and the indication light lights
up on the control panel at “water full”. You have to empty the water collection tray before you can
continue using the device (see ‘CLEANING AND MAINTENANCE – Water drainage’).
• If you often use the device to dehumidify the air, you can also use the continuous drainage (see
‘CLEANING AND MAINTENANCE – Water drainage’).
USAGE - Sleep function
The device has a sleep function. If you turn on this function, the device will operate in its most silent and
energy saving mode.
ATTENTION:
The sleep function only works in the “cool” mode.
1. Press the button “sleep” (figure 1, H) to turn on the sleep function. The device switches to the lowest
and most energy saving mode.
2. Press the button “sleep” again to turn off the sleep function.
ATTENTION:
After turning off the sleep fuction the device remains in the “cool” mode.
… 45 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bestron AAC9000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bestron AAC9000 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 5,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info