Manual Bestron AAC9000 (page 44 of 75) (English, German, Dutch, French, Italian, Spanish)

702402

Zoom out

Zoom in

1/75

INSTALLATION

This airconditioner must be connected to an electrical circuit which includes on building side a 16 A circuit

breaker. It is to place away from easily combustible materials and a free space of 30cm around the appliance.

A 30 mA residual current device is recommended additionally. In case of using an extension cable only use

proper diameters, in case of multiple sockets do not overload it. The airconditioner must be placed on a flat

floor with sufficient load capacity.

INSTALLATION - Installing heat exhaust

1. Choose a place near a window and socket to

place the device.

2. Screw the adapter (15) on the drainage hose

(see figure 2).

3. Install the drainage hose onto the hot air outlet

(9) on the back of the device (see figure 2).

4. Take the window slide set, and pull the inner part

outside until the hole in the outer part is visible.

5. Put the T-bolt from the screw set (16) through

the hole (in the right direction, see figure 3).

6. Push the parts of the window slide set back

together, making sure the T-part of the T-bolt

slides into the slit of the inner part of the window

slide set lengthwise.

7. Screw the butterfly nut from the screw set

loosely onto the T-bolt.

8. Slide the window half open, and place the

window slide set (17) in the frame. The window

slide set can be installed both horizontally and

vertically (see figure 4 and 5).

9. Extend the window slide set so the full width of

the frame is being covered.

10. Fasten the butterfly nut to fix the window slide

set.

11. Close the window as far as the window slide set,

so this covers the window opening completely.

12. Place the device at least 50 cm away from walls

and other objects.

13. Stretch out the exhaust hose, place the flat end

of the hose onto the opening in the window slide

set and fix the hose with the remaining bolt and

ring.

ATTENTION:

• To prevent breaking, the exhaust host can only

be twisted or deformed to a certain limit.

• The maximal length of the exhaust hose is 150 cm. Do not use extensions or other exhaust hoses; this

can cause serious malfunctions.

• To prevent overheating, the outlet of the device must not be blocked.

• If you have a tilt window instead of a sliding window, purchase a window sealing kit to close off your

entire window airtight.

4 5

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bestron AAC9000 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 5,71 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bestron AAC9000 Manual

Product: