800735

Bestron AAC12000 Manual

44
Zoom out
Zoom in
Previous page
1/88
Next page
44
EN
INSTALLATION
This air conditioner must be connected to an electrical circuit with a 16 A circuit breaker. It must be kept
away from easily flammable materials and a free space of 30 cm around the device. In addition, a 30 mA
residual current device is recommended. Only use an approved extension cable with a capacity of 16 A.The
air conditioner must be placed on a level surface with sufficient load capacity.
INSTALLATION - Install heat dissipation
1. Choose a location near a window and an
electrical outlet to place the device.
2. Screw the adapter (figure 1-16) onto the drain
hose (figure 1-14) see also figure 2.
3. Mount the drain hose on the warm air outlet (6)
at the back of the appliance (see figure 2).
ATTENTION:
• To avoid damage, the drain hose should not be
deformed or twisted excessively.
• The maximum length of the drain hose is 150
cm. Do not use extensions or other drain hoses
as this can cause serious malfunctions.
• To prevent overheating, do not block the air
outlet on the device.
• If you have a tilt window instead of a sliding
window, purchase a window sealing set to be
able to seal your entire window airtight.
USE - Power on/off
1. Insert the plug in the wall socket. The appliance will beep, this is normal. The displays (Figure 1-A)
indicate the current room temperature.
2. Press the “POWER” button (Figure 1-G). The device will start operating in the last mode used. When
you turn on the device for the first time, it is in cooling mode. The appropriate indicator light above the
button “MODE” comes on.
3. Set the preferred air flow direction. Direct the air flow straight up or slightly forward by setting the
horizontal blinds/shutters (figure 1-3) with the “SWING” button (see figure 1-B), using the supplied
remote control or via the app. Easily rotate or move the unit thanks to the sturdy castors to direct the
airflow into the room.
4. Press the “POWER” button again to switch off the appliance.
5. Remove the plug from the wall socket after use.
USE - Set mode
The device is equipped with three working modes, with which you can ventilate, dehumidify and cool the
room.
Ventilate
1. Press the “MODE” button (Figure 1-F) once or multiple times, until the indicator light “FAN” Lights up.
The device will operate as a ventilator.
2. Press the “FAN” button (Figure 1-C) to switch between low or high speed for the discharged air.
Dehumidify
1. Press the “MODE” button (Figure 1-F) one or more times, until the indicator “DRY” lights up. The device
switches to the lowest speed and will now extract moisture from the air.
2
… 44 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bestron AAC12000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bestron AAC12000 in the language / languages: English, German, Dutch, French, Italian, Swedish, Spanish as an attachment in your email.

The manual is 3.3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info