Manual Bernina Bernette 340 Deco (page 19 of 75) (English)

614698

Zoom out

Zoom in

1/75

Getting Ready to Embroider

Hooping

Mark the centerlines on the right side of the fabric with tailor's

chalk or a fabric marker.

1 Fabric

2 Centerlines

Place the outer hoop on a flat surface, with the attaching

mechanism extending over the edge the surface.

Step 1: Calibrate the hoop (= adjust width to your project)

a) Loosen the tightening screw of the outer hoop.

b) Place the fabric with stabilizer on the outer hoop.

c) Lay the inner hoop over the fabric.

d) Push the inner hoop into the outer hoop

e) Tighten the screw with your fingers, do not use a screwdriver.

f) Pop out the inner hoop

3 Hoop tightening screw

4 Inner hoop

5 Outer hoop

Note:

This first step only calibrates the hoop for the thickness of the fabric.

It is not necessary to have exact placement of the fabric.

Step 2: The final hooping.

During this second step the fabric is correctly placed.

a) Place the fabric on a flat surface

b) Lay the inner hoop with the template inserted on the fabric,

matching the centerlines on the fabric and the template.

c) Pick up the inner hoop and the fabric together and place

them on top of the outer hoop.

d) Push the inner hoop into the outer hoop – do not readjust

the tightening screw on the outer hoop.

e) Remove the template.

6 Template

Having finished step 2 the fabric should sit well stretched in the

hoop. You are now ready to attach the hoop with the fabric onto

the Deco 340.

Note:

It is only necessary to calibrate the hoop once if you are

embroidering several pieces with the same fabric and stabilizer.

Important:

When placing the fabric on the embroidery hoop, always place the

outer hoop on a flat surface. Make sure the attaching mechanism

extends over the edge of the surface, such that the attaching pins

do not sit on the surface.

7 Attaching Pins

8 Edge of the flat surface

After hooping the fabric should be flush with the lower edge the

outer hoop. Depending on the thickness of the fabric and the

stabilizer the inner hoop may extend over the top of the outer hoop

quite a bit – this is correct!

There are two things to keep in mind when hooping fabric: the act of hooping and the stabilization. Following carefully the related

instructions in this manual will help you to achieve the best results for your embroidery project. For hooping instructions follow the

descriptions below, for the use of stabilizer please refer to page 19.

Can Bernette Deco 340 be usef for normal stitching ? I would like to know before purchasing item. Submitted on 21-7-2020 at 13:29
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bernina Bernette 340 Deco in the language / languages: English as an attachment in your email.

The manual is 14,24 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bernina Bernette 340 Deco Manual

Product: