Manual Bernina Bernette 340 Deco (page 17 of 75) (English)

614698

Zoom out

Zoom in

1/75

Getting Ready to Embroider

Change Needle

Turn off the power switch and disconnect the machine from the

power supply.

Raise the needle by turning the handwheel and lower the presser

foot.

Holding the needle tight, loosen the needle clamp screw by turning

it counterclockwise.

Remove the needle from the clamp.

Insert a new needle into the needle clamp with the flat side of the

needle to the rear.

1. Needle clamp screw

2. Flat side of the needle

When inserting the needle into the needle clamp, push it up against

the stopper pin and tighten the needle clamp screw firmly.

3. Stopper pin

Note:

Never use a blunt needle. To check needle straightness, place the

flat side of the needle onto something flat (a needle plate, glass

etc.). A gap between the needle and the flat surface should be

consistent.

4. Gap

Can Bernette Deco 340 be usef for normal stitching ? I would like to know before purchasing item. Submitted on 21-7-2020 at 13:29
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bernina Bernette 340 Deco in the language / languages: English as an attachment in your email.

The manual is 14,24 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bernina Bernette 340 Deco Manual

Product: