614581
32
Zoom out
Zoom in
Previous page
1/52
Next page
31
Sewing stitches - Examples of application
Examples of Application
Zipper foot/sole No. 4
Straight Stitch
Preparation
baste seam closed and clean finish the seam allowance
baste or pin zipper in place so that fabric folded edges meet over the center
of the zipper
Sewing
open zipper a little
start sewing from top left
position the foot so the needle stitches along the edge of the zipper coils
stop in front of the pull (needle position down), raise the presser foot and
close zipper again
continue to sew to the base of the zipper (needle position down)
turn fabric and sew across the seam (needle position down)
turn fabric again and sew second side of the zipper from bottom to top
Variation: Sew both sides of zipper from bottom to top
suitable for all fabrics with nap or grain (e.g. velvet)
prepare zipper as described above
start sewing in the seam of the zipper end and sew first side from bottom to
top
sew the second side the same way from bottom to top
To sew around zipper pull
close the zipper and sew up to about 2” (5cm) away from the pull
stop with the needle down in the fabric, raise the presser foot.
Open zipper, pulling the tab below the needle; lower presser foot
and continue to sew
Seam begin
Hold thread firmly when starting to sew = pull fabric slightly to the
back (fewer stitches).
Zipper or fabric is thick or densely woven
For even stitch formation use a 90 -100 needle.
Zippers
033301.71.04_2014-02_Manual_B330_B350_PE_B380_EN
32


Need help? Post your question in this forum.

Forumrules
1

Forum

bernina-b380

Reset search

  • Hi my Bernini is sewing on one spot. How do I make it sew straight sewing Submitted on 25-7-2020 at 05:59

    Reply Report abuse
  • Hi
    I am trying to find my way to seem No 107on my chart. But for some reason I can only find all the seems with only 2 digets fx button hole is #11
    Any one know how I can do this? I wish to do a small patch work bot are stuck.
    Thanks Submitted on 16-2-2020 at 19:52

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bernina B380 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bernina B380 in the language / languages: English as an attachment in your email.

The manual is 8,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bernina B380

Bernina B380 User Manual - German - 50 pages

Bernina B380 User Manual - Dutch - 52 pages

Bernina B380 User Manual - French - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info