614581
33
Zoom out
Zoom in
Previous page
1/52
Next page
32
Sewing stitches - Examples of Application
for all fabrics
overcasting
elastic seams
decorate sewing
Overcasting edges
guide edge of fabric into the center of the presser foot
do not select too wide a width or too long a stitch
needle goes into fabric on one side and over the edge into the air on the
other side
the edge should lie flat and not roll
use a fine darning thread for lightweight fabric
Satin stitch
dense, short zig-zag stitch (stitch length 0.5-0.7mm, 1/5" to 1/3")
use satin stitch for appliqué, embroidery, etc
Reverse pattern foot/sole No. 1
A Zig-zag stitch with altered stitch width
B Zig-zag stitch with altered stitch length
C Edge neatened with zig-zag stitch
Darning
Zig-zag
Reverse pattern foot/sole No. 1
Automatic Buttonhole foot with slide No. 3A
Darning program
Quick darning of holes or worn areas
Replaces threads along the lengthwise grain in all fabrics.
Darning with Reverse pattern foot/sole No. 1 (auto stitch counter)
insert the needle in the top left of the worn area
sew the first vertical row and stop the sewing computer
press the Quick reverse button to program the length
complete Darning program; the sewing computer stops automatically
clear the program by pressing the «clr» button
Move project accordingly for a wider and/or longer darning area.
Darning with the Automatic buttonhole foot with slide No. 3A
use for small tears and damaged areas, not more than 3cm (1 1/4”) long
same procedure as with foot No. 1
Reinforcement
Use fine fabric or (adhesive) interlining as a backing.
Preparation
Hoop fabric into darning ring to prevent puckering.
BA C
033301.71.04_2014-02_Manual_B330_B350_PE_B380_EN
33


Need help? Post your question in this forum.

Forumrules
1

Forum

bernina-b380

Reset search

  • Hi my Bernini is sewing on one spot. How do I make it sew straight sewing Submitted on 25-7-2020 at 05:59

    Reply Report abuse
  • Hi
    I am trying to find my way to seem No 107on my chart. But for some reason I can only find all the seems with only 2 digets fx button hole is #11
    Any one know how I can do this? I wish to do a small patch work bot are stuck.
    Thanks Submitted on 16-2-2020 at 19:52

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bernina B380 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bernina B380 in the language / languages: English as an attachment in your email.

The manual is 8,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bernina B380

Bernina B380 User Manual - German - 50 pages

Bernina B380 User Manual - Dutch - 52 pages

Bernina B380 User Manual - French - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info