614660
75
Zoom out
Zoom in
Previous page
1/132
Next page
75Trouble shooting
Trouble shooting
In most cases you will be able to identify and remedy
faults by checking the following.
Check whether:
·the upper and lower threads are threaded correctly
·the needle is inserted as far up as possible with the flat
side to the back
·the needle size is correct check the needle/thread
table
·the machine is clean brush out any thread lint
·the hook race is clean
·any threads are trapped between the tension discs or
under the bobbin case spring
Upper thread breaks
·upper thread tension is too tight
·needle is not designed to be used with the chosen
thread
·needle has been inserted incorrectly the flat side of
the shank must be to the back
·needle is bent or blunt
·for additional needle information, check the Creative
Consultant and the charts on pages 7172
·poor quality, knotted or dried out thread has been used
·use the correct spool disc
·stitch plate or hook tip damaged take your machine
to your BERNINA®dealer
Lower thread breaks
·the lower thread tension is too tight.
·the bobbin is jamming in the bobbin case. Remove and
replace the bobbin.
·the hole in the stitch plate has been damaged by the
needle. This must be polished by an authorized
BERNINA®service technician
·the needle is blunt or bent.
Skipped stitches
·wrong needles used use only 130/705H system
·the needle is blunt, bent or incorrectly inserted push
completely to the top when inserting.
·the needle point does not suit the fabric being sewn
if necessary, use a ball point or stretch needle for
knitted fabrics and a cutting point for hard leather.
Needle breaks
·needle clamp screw loose.
·fabric taken out forward instead of behind the presser
foot.
·when sewing over thick area, the fabric was pushed
with the needle still in the fabric.
·poor quality thread, unevenly wound or knotted.
Faulty stitching
·remnants of thread between the tension discs
·remnants of thread under the bobbin case spring
·incorrect threading. Check upper and lower threads
·use the correct spool disc
Machine fails to run or runs slowly
·plug not fully inserted
·power switch in off (0) position
·machine has been standing in a cold room
·bobbin winder engaged
Machine sews in reverse
·reverse sewing function is activated
Defective sewing-light
·Please note that it is forbidden to change the
new CFL-sewing light by a unauthorized person.
For Models with this new CFL-sewing light,
the light can ONLY be replaced by an authorized
Bernina Dealer.
bed_artista_180_engl_V3 7.10.2002 16:30 Uhr Seite 75
75


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bernina Artista 180 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bernina Artista 180 in the language / languages: English as an attachment in your email.

The manual is 2,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bernina Artista 180

Bernina Artista 180 User Manual - English - 40 pages

Bernina Artista 180 User Manual - German - 40 pages

Bernina Artista 180 User Manual - Dutch - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info