614660
73
Zoom out
Zoom in
Previous page
1/132
Next page
73Needle, thread, fabric feed
1
Feed-dog and fabric feed
Height Compensation Tool
Feed-dog and sewing corners
Let the fabric feed evenly! Holding back will result in
thread build-up.
Pulling or pushing will
result in gaps.
The feed-dog can work
normally when the foot is
level.
If the foot is at an angle,
e.g. when sewing over
thick to thin or vice-versa,
the feed-dog cannot grip
and feed the fabric.
To solve this problem,
place one, two or three
compensating plates as
required behind the needle
under the presser foot.
Correct this by placing one
or more compensating
plates as close as possible
to the edge of the fabric.
When sewing corners only
a small section of the
fabric is actually on the
feed-dog so that it cannot
grip the fabric well.
The gap between the two
rows of teeth is relatively
large due to the width of
the stitch plate hole.
To correct the height in
front of the foot, place
one or more plates to the
right of the foot next to
the needle. Sew until the
foot is level again and
remove the plates.
Important
Feed-dog and stitch length
With each stitch the feed-dog moves forward by one step.
The length of this step is determined by the stitch length
selected. With an extremely short stitch length, the steps
are short. The fabric moves under the foot quite slowly,
even at full sewing speed. Buttonholes, satin stitch and
some decorative stitches are sewn with a very short stitch
length.
bed_artista_180_engl_V3 7.10.2002 16:30 Uhr Seite 73
73


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bernina Artista 180 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bernina Artista 180 in the language / languages: English as an attachment in your email.

The manual is 2,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bernina Artista 180

Bernina Artista 180 User Manual - English - 40 pages

Bernina Artista 180 User Manual - German - 40 pages

Bernina Artista 180 User Manual - Dutch - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info