508645
35
Zoom out
Zoom in
Previous page
1/148
Next page
35
Functions
Combination subdivider (1)
each combination or memory folder can be
subdivided into several parts
only those parts where the cursor is located
will be sewn
to sew another part, the cursor must be
placed in this part
Combination subdivider (2)
each combination can be subdivided as
desired
after stopping, the needle moves to the next
part to be sewn
Presser foot indicator
number of presser foot recommended is
shown for the stitch pattern selected
if the presser foot is raised it is indicated with
an animation
touch the icon
screen is opened with further presser foot
options
Back Stepping
the last 200 needle penetrations of a stitch
pattern are retraced, i.e. sewn backwards
(see p. 79 on how to select the function)
Save
save stitch pattern combinations and lettering
Delete
e.g. single stitch pattern, pattern combina-
tions, memory bank contents, stitch pattern in
personal program etc.
Balance
balance forward and reverse stitches
balance dual feed
Stitch selection by numbers
select individual stitch pattern by inputting the
stitch pattern number
Permanent reverse sewing
the sewing computer sews backwards
permanently (see p. 79 on how to select the
function)
Upper/Lower Case
switch from upper case to lower case lettering
File Drawers
saved stitches are visible
Thread tension
change upper thread tension
the respective value is visible in the icon
Presser foot pressure
increase or decrease the presser foot
pressure using the multifunction knobs
the respective value is visible in the icon
Time/Alarm
set the current time (hh:mm) in the upper part
of the screen using the «+» and «-» icons
touch the alarm button in the lower part of the
display
set the alarm time using the «+» and «-» or
the multifunction knobs. A personal message
can be input using the keyboard
the current time now appears in red numbers
Security Program
when selecting the respective needle icon the
stitch width will be limited automatically
this prevents the inserted special needle
(double needle etc.) from hitting the presser
foot or stitch plate = avoiding needle breakage
the numbers on the needles represent the
distance in mm between the needles
by selecting the standard needle icon the
standard needle is active again and the stitch
width limitation is switched off
by selecting the corresponding stitch plate the
stitch width is automatically limited, so the
inserted standard needle cannot hit the stitch
plate
the function remains active even when the
sewing computer is turned off and on
Single Mode
the Single Mode is always active (blue) when
turning on the sewing computer and only the
selected stitch can be sewn
Combi Mode
touch the button
the Combi Mode is active (blue) and stitch
combinations can be programmed
Test-sew first on a piece of the fabric you
intend to use for the sewing project.
032298.53.04_1204_B820_EN
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bernina 820 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bernina 820 in the language / languages: English as an attachment in your email.

The manual is 27,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bernina 820

Bernina 820 User Manual - German - 216 pages

Bernina 820 User Manual - Dutch - 148 pages

Bernina 820 User Manual - French - 148 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info