508645
34
Zoom out
Zoom in
Previous page
1/148
Next page
34
Functions
Confirm Selection
activate or confirm change/selection
Leave Active Screen
close application
return to the last active screen
Long stitch
the sewing computer sews every second
stitch (max. stitch length 12mm)
can be used for practical and decorative
stitches
exception: buttonholes
Mirror Image (Up/Down)
the sewing computer sews the selected stitch
pattern in vertical Mirror Image (up/down – de-
termined by the sewing direction)
Mirror Image (Left/Right)
the sewing computer sews the selected stitch
pattern in horizontally Mirror Image (left/right
– determined by the sewing direction)
Stitch Counter
when the desired length is achieved (e.g. first
buttonhole bead or straight stitch), touch the
Quick Reverse Button
the display changes to «auto» (for the
buttonhole, only after length of second bead is
determined by pressing the Quick Reverse
Button)
the stitch pattern selected is temporarily
programmed
Pattern Extend 2-5x
touch the icon one or more times, the
numbers 2-5 appear
stitch integrity is maintained
stitch pattern is extended
Pattern begin
the needle moves to the beginning of a stitch
pattern or program
Buttonhole Length Direct Entry
enter buttonhole length via stitch width or
stitch length knob. Number in mm
Pattern repeat 1-9x
touch the icon several times, the numbers 1-9
appear
number 1: the sewing computer stops at the
end of an individual stitch or stitch combina-
tion
numbers 2-9: the sewing computer stops at
the end of a stitch or stitch combination after
the number of repeats selected
Manual Buttonhole
special screen appears
sew manual buttonhole in 5 or 7 steps
(depending on buttonhole type)
Programming Buttonhole Length
icon is automatically highlighted in blue when
a buttonhole is selected
set the buttonhole length with the Quick
Reverse Button or directly program the length
displayed by pressing the icon
function turns inactive after programming the
length
if a new length is to be programmed, touch
icon again
Feed-dog position
touch the icon «lower feed-dog» = feed-dog is
lowered
the lowered feed-dog is shown by the red,
flashing symbol
Buttonhole Slit Width
set the buttonhole slit width to between 0.1mm
and 2.0mm using the Stitch Width or the Stitch
Length Knob
the standard width is 0.6mm
Securing
touch icon before sewing starts = single
pattern is secured at the start with 4 securing
stitches
touch icon during sewing individual stitches =
individual stitches will be secured at the end,
the sewing computer stops
program the function within a pattern combina-
tion = each individual pattern of the combina-
tion can be secured at the start or the end
Multi-function button
only active in combination mode
when selected, a screen with further functions
appears
Lettering size in alphabets
when alphabet is selected, the lettering size is
9mm
when the function is selected, «2» is activated
and the alphabet is sewn with 6mm lettering
size
Sewing
Active functions are highlighted in blue, inactive functions are gray.
The multifunction keys are switched off by keeping them pressed a few seconds.
032298.53.04_1204_B820_EN
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bernina 820 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bernina 820 in the language / languages: English as an attachment in your email.

The manual is 27,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bernina 820

Bernina 820 User Manual - German - 216 pages

Bernina 820 User Manual - Dutch - 148 pages

Bernina 820 User Manual - French - 148 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info