508640
16
Zoom out
Zoom in
Previous page
1/92
Next page
Power/light switch
The power/light switch is conveniently placed
on the handwheel side of the machine in
front of the socket.
0 = Off
I = On with light
Interruptor principal y de la luz
El interruptor principal y de la luz se encuen-
tra bien visible en la parte del volante, del
-
ante del enchufe de la máquina.
0 = off (desconectada)
I = on (conectada)
Swing-out presser foot
The swing-out presser foot (patented
by BERNINA) provides easy access for
threading needles or loopers. It is also easier
to change the needles and insert tape or
elastic into the guide on the foot.
To swing out:
• Raise the needles. Turn the handwheel
in the normal direction (as indicated by
the arow) until the red stop mark of the
handwheel indicator is centered in the
window.
• Raise the presser foot and swing it out to
the left.
To position for sewing:
• Push the foot from left to right.
• Lower the foot. It will engage into the
sewing position.
Note: For safety reason the needles
drive mechanism is locked while the foot is
not in working position.
Prensatelas giratorio
El prensatelas giratorio (patentado por
BERNINA) mejora la visibilidad en el
enhebrado de lanzaderas y agujas.
Además facilita el cambio de las agujas y la
colocación de una cinta en la guía-cinta del
prensatelas overlock.
Girar el prensatelas:
• Subir las agujas. Girar el volante en su
dirección normal (como indica la flecha)
hasta que la marca roja del volante
aparezca en el centro de la ventana de
indicación de la posición del volante.
• Subir el prensatelas y girarlo hacia la
izquierda.
Colocar el prensatelas en posición de
costura (recto):
• Girar el prensatelas de izquierda a
dere
cha.
• Bajar el prensatelas, se engancha en
posición de costura.
Indicación: Por razones de seguridad
se bloquea el movimiento de la aguja
mientras el pie prénsatelas esté girado
Haupt- und Lichtschalter
Der Haupt- und Lichtschalter ist übersichtlich
auf der Handradseite vor der
Maschinensteckdose platziert.
0 = aus
I = ein
Commutateur principal et
interrupteur de lumière.
Le commutateur principal / interrupteur de
lumière est disposé visiblement du côte du
volant devant la prise de la machine.
0 = arrêt
I = marche
Ausschwenkbarer Nähfuss
Der ausschwenkbare Nähfuss (patentiert
durch BERNINA) verbessert die Übersicht
beim Einfädeln von Greifern und Nadeln.
Er erleichtert zudem das Auswechseln der
Nadeln sowie das Einführen eines Bandes in
die Bandführung des Overlockfusses.
Zum Ausschwenken:
• Nadeln anheben. Handrad in der auf
der Verschalung angegebenen Richtung
drehen, bis die rote Marke an der Handrad
Positionsanzeige ganz im Fenster sichtbar
ist.
• Nähfuss hochstellen und nach links
ausschwenken.
Nähfuss in Nähposition (gerade) stellen:
• Nähfuss von links nach rechts drücken.
• Den Nähfuss senken, er rastet in
Nähposition ein.
Hinweis: Aus Sicherheitsgründen wird
der Nadelantrieb blockiert solange der
Nähfuss ausgeschwenkt ist.
Pied-de-biche pivotant
Le pied-de-biche pivotant (Brevet déposé par
BERNINA) améliore la vue d'ensemble lors
de l'enfilage des boucleurs et des aiguilles.
Par ailleurs, il facilite le remplacement des
aiguilles ainsi que l'introduction d'un ruban
dans le guide prévu sur le pied pour point de
surjet.
Pour pivoter vers l'extérieur:
Relever l'aiguille. Tourner le volant dans la
direction indiquée sur le bâti jusqu'à ce que
le repère rouge de l'affichage de la position du
volant soit parfaitement visible dans la fenêtre.
Relever le pied-de-biche et le faire pivoter
vers l
'e
xtérieur par la gauche.
Mettre le pied-de-biche dans la position
de couture (c'est-à-dire à droite):
• Presser le pied-de-biche de la gauche vers
la droite.
Abaisser le pied-de-biche, il s'encliquette
dans la position de couture.
Remarque: pour des raisons de sécurité, le
pignon de l'aiguille se bloque aussi longtemps
que le pied est pivoté.
2.1. Basic Operating Procedures / 2.1. Manejo
2.1. Bedienung / 2.1. Commandes
15
2
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bernina 1300MDC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bernina 1300MDC in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 24,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bernina 1300MDC

Bernina 1300MDC User Manual - German, Dutch, French, Italian - 92 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info